Publicidad
Idiomas disponibles
Idiomas disponibles
slots and turn clockwise to lock in place.
Immediately tighten the two mounting
screws firmly.
LOCKING SLOTS OF CEILING CANOPY ARE
PROVIDED ONLY AS AN AID TO MOUNTING.
DO NOT LEAVE FAN ASSEMBLY UNATTENDED
UNTIL ALL FOUR CANOPY SCREWS ARE EN-
GAGED AND FIRMLY TIGHTENED.
2. Install the remaining two mounting screws
into the holes in the canopy and tighten
firmly.
3. Install the decorative canopy ring by align-
ing the ring's slots with the screws in the
canopy. Rotate the ring counter-clockwise
to lock in place.
4. You may now proceed to attaching the fan
blades.
Attaching the
Fan Blades
1. Attach blade to blade bracket, using the
washer head screws supplied (Figure 13).
Start a screw into the bracket. Repeat for the
remaining two screws.
2. Tighten each screw securely.
3. Fasten the blade/blade bracket assembly to
the motor by inserting the alignment post
into the slot on the bottom of the motor and
8.
tightening the blade bracket screws. Please
note that the blade bracket screws are pre-
installed into the blade bracket (Figure 14).
4. Repeat steps 1-3 for the remaining blades.
Figure 13
Figure 14
Publicidad
