Goalzero YETI 500X LITHIUM Manual De Instrucciones página 7

Frequently Asked Questions
What type of battery is in my Goal Zero Yeti?
Your Goal Zero Yeti uses custom designed Lithium Ion. Here are some basic facts about Lithium Ion
batteries:
1. Lithium Ion batteries can store and release a lot of energy in a short period of time.
The batteries in your Goal Zero Yeti are in a protective enclosure with a sophisticated battery
management and protection system controlling its terminals to the outside world.
2. It is critical that your battery does not get wet as moisture and water can get into the battery cells
behind the protection circuitry and bypass that protection.
Can I take the Yeti 5 0 0 X on a plane?
No, the lithium battery is over 100Wh and not allowed on planes under FAA regulations.
How do I know if my Goal Zero Yeti is charged?
To check the charge level of your Goal Zero Yeti, refer to the LCD Battery Display. When lit up, you'll see a
battery outline with 5 segments, indicating the current charge level. It is OK to use your Goal Zero Yeti
even when it's not fully charged.
Why is the light on the AC button blinking?
A blinking light on the AC button indicates that at the current load, the AC inverter will be shutting off
soon. Recharge your Goal Zero Yeti as soon as possible to continue powering your device. Once the AC
inverter has shut off, the Yeti will attempt to reset itself three times. After three attempts, the AC
inverter will remain off until you physically reset it by pushing the AC button or by recharging the
battery a small amount.
Why is the light on the port activation button red?
A red light on the 12V, USB, and AC activation buttons indicate the port has been shut off to protect
whatever you have plugged in. Recharge your Goal Zero Yeti as soon as possible to continue powering
your devices.
How do I know if my device will work with the Goal Zero Yeti?
First, you'll need to determine the amount of power your device requires. This may require
10
some research on your end, a good internet search or examining the user guide for your device
should suffice.
Second, you will need to check the capacity for the individual output ports. For example,
Zero Yeti's AC port is powered by an inverter that allows for 300W of power.
This means if your device is pulling more than 300W for an extended period of time, the Goal Zero
Yeti's inverter will shut off. Another number to watch for is the surge rating of your device as
compared to that of the port. The Goal Zero Yeti inverter has an advanced surge management system
that will maximize its compatibility with various devices, but there will still be items that will surge at
a higher rate, and for a longer time, than the Goal Zero Yeti can manage, in which case the port will
turn itself off.
Finally, once you know your device is compatible, you'll want to determine how long you'll be able to
power your gear from the Goal Zero Yeti. Here's a quick and dirty lesson in power.
All Goal Zero power packs and solar generators have a number in their name, ex. Sherpa 100AC
Power Bank, Goal Zero Yeti 500X. These numbers refer to the Watt Hours (Wh), or the amount of
energy that can be stored in each battery and how you'll know if your gear is compatible with each
Power Station. For example, a 200Wh Power Station should run a 100W light for 2 hours
(200/100=2). If your gear falls within the 500Wh capacity of the Goal Zero Yeti, you'll want to check
the restrictions on each of the output ports.
the Goal
11