Remote Control - Yamaha RX-497 Manual De Instrucciones

Remote control

This section describes the function of each button on the
remote control used to control this unit or other
components made by YAMAHA or other manufacturers.
The functions of the buttons used to control your other
audio and video components are the same as those of the
corresponding buttons on those components. Refer to
those components' instruction manuals for details. To
operate other components using this remote control, see
"REMOTE CONTROL FEATURES" on page 33.
1
POWER POWER
TV AV
CD MD/TAPE
2
DVD DTV/CBL
REC
DISC SKIP
3
FREQ/TEXT
MODE PTY SEEK
TV VOL TV CH
TV MUTE TV INPUT
1 2
4
5 6
9 0
5
TITLE
BAND
6
A/B/C/D/E
RETURN
PRESET/CH
(Europe model)
1 Infrared signal transmitter
Sends infrared signals.
2 Input selector buttons
Select the desired input source and change the control area
(see page 33).
7
STANDBY POWER
8
TUNER
9
VCR PHONO
CODE SET SPEAKERS
A
0
B
A
EON
SLEEP
B
START
C
VOLUME
D
MUTE
3 4
7 8
10
ENT.
MENU
ENTER
A/B/C/D/E
DISPLAY
3 Radio Data System control buttons
Controls the Radio Data System features.
Note
The Radio Data System features (FREQ/TEXT, EON, PTY
SEEK MODE and PTY SEEK START) are only applicable to the
Europe model and are operational only when TUNER is selected
as the input source. For details, see "Receiving Radio Data
System stations" on page 26.
4 Numeric buttons (1 to 8)
Select the preset station number (1 to 8) when TUNER is
selected as the input source.
5 BAND
Switches to the previously used reception band (FM or
AM) when TUNER is selected as the input source.
Note
The frequency of the previously received station is automatically
recalled.
6 A/B/C/D/E j / i
Selects the preset station group (A to E) when TUNER
is selected as the input source (see page 25).
PRESET/CH u / d
Selects the preset station number (1 to 8) when
TUNER is selected as the input source (see page 25).
7 STANDBY
Sets this unit to the standby mode.
Notes
• This button is operational only when MASTER ON/OFF on the
front panel is pressed inward to the ON position.
• In the standby mode, this unit consumes a small amount of
power to receive infrared signals from the remote control.
• This button does not set Zone 2 to the standby mode.
8 POWER
Turns on this unit.
Notes
• This button is operational only when MASTER ON/OFF on the
front panel is pressed inward to the ON position.
• This button does not turn on Zone 2.
CONTROLS AND FUNCTIONS
7