Auping Aureo Manual Del Usuario página 10

Operating the Aureo
Turning the light on
and off
The Aureo bed lamp
has a dimmer switch
to regulate
brightness of the halo-
gen bulb. The silver
touch control on the
stem also acts as the dimmer (see fig. 8).
• To turn the light on, gently press the silver
control switch with your thumb and index fin-
ger.
• To use the dimmer press slightly harder on
the touch control, the light will become
brighter or dimmer.
• If you let go of the touch control, the lamp will
stay at the brightness level you have rea-
ched.
• If you wish to reverse the direction of dim-
ming, let go of the touch control and then
hold it down again until the lamp has
reached the brightness you require.
• The night light cannot be dimmed.
GB8
2764 BinnenW.pdf - pag.8
the
fig. 8
LET OP !!! Lage resolutie!
Adjusting the
shade
The shade can be tur-
ned as well as angled
for optimum lighting
(fig. 9).
The floor night
light
The floor night light
shines continuously
and casts a faint light
on the floor (fig. 10).
Manual
adjustment
The Aureo bed lamp
can be adjusted
manually to the desi-
red position (fig. 11).
fig. 9
fig. 10
fig. 11
April 12, 2007