Auping Aureo Manual Del Usuario página 9

Attaching the bed lamp to
the Auping Royal mesh base
• Place the back section of your Royal mesh
base in the most upright position.
• From underneath, slide the lamp base round
the side tube of the mesh base, place the lamp
base at a location where it cannot be touched
by moving parts of the Royal mesh base. Take
care, when using the Aureo in combination with
the Auronde bed model, to attach the bed lamp
at a distance of at least 3 cm from the head
end unit.
• Slide the clamp strip A between the side tube
and the lamp base B (fig. 1). The lamp now
remains suspended.
• Adjust the lamp to a vertical position
(fig. 2).
• Tighten the screws with the enclosed Allen
key (fig. 3).
2764 BinnenW.pdf - pag.7
fig. 1
fig. 3
LET OP !!! Lage resolutie!
fig. 2
fig. 4
April 12, 2007
± 42 cm
GB7