Publicidad
Idiomas disponibles
Idiomas disponibles
ME7755.book Page 9 Friday, July 10, 2009 9:50 AM
2 Description
Main Parts
1
Main body of the appliance
2
ON/OFF switch
3
Pilot light
4
Massage intensity control
5
Main roller
6
Massage rollers
7
Carry handle
8
Non-slip pads
9
Slope adjustment attachment
10 Power cable
11 Roller protective fabric
12 Protective fabric fasteners
Electrical Characteristics
Voltage: 230-240V, 50Hz, 40W
Reflexology Relieves the Pain and Tiredness of Feet and Legs
Reflexology Rotor 24 is a foot and leg massager with 24 rotating
massage rollers, whose speed can be gradually increased.
The massage stimulates the reflex points in the foot, by means of its 24
rotating rollers, eliminating the sensation of tired feet and legs, whilst
producing a relaxing sensation throughout the body.
Stimulating the base of the foot achieves a beneficial effect throughout
the body, improving blood circulation and helping to eliminate toxins.
3 General Recommendations for Use
• We recommend using Reflexology Rotor 24 on bare feet with the rollers
covered in their protective fabric (11).
,
The protective fabric is fully removable and washable.
• If you use the massager without the protective fabric (11), we
recommend you wear tights or similar to obtain a more relaxing
massage.
• To attach the protective fabric (11), place the fabric around the main
roller (5), close the zip and tie the cords to the fasteners (12) to secure it
(fig. 1).
• Do not apply creams when using the protective fabric (11).
• To change the slope of the massager, use the attachment (9) to obtain
the desired position (fig. 2).
• The intensity control allows you to adjust the intensity of the massage
according to your every need. Start with a gentle speed and
progressively increase depending on your sensitivity to the massage.
Description
All manuals and user guides at all-guides.com
en
9
Publicidad
