TECshow Dualtec 3-in-1 Manual De Usuario página 6

5. MAIN FUNCTION
1. DMX 512 Address Setting
Choose , press ENTER button to confirm.
Press UP/DOWN button to find initial address, then
press ENTER button to save it. After 10 seconds or
press MENU for long time to return to main menu.
2. Channel mode
Choose , press ENTER button to confirm.
Press UP/DOWN button to select the channel, like
1CH or 21CH mode, etc. Press ENTER button to
save it. After 10 seconds or press MENU for long
time to return to main menu.
3. Slave mode
Choose , press ENTER button to enter, MAST
(Master) or SL1 (Slave 1) or SL2 (Slave 2) mode,
press ENTER button to save it. After 10 seconds or
press MENU for long time to return to main menu.
4. Show mode
Choose , press ENTER button to confirm,
enter SH0 (Random show) or SH1 (show 1) or SH2
(show 2) or ... or SH8 (show 8),then press ENTER
button to save it. After 10 seconds or press MENU
for long time to return to main menu. Choose
press ENTER button to confirm, press UP button to
enter AUTO, then press ENTER to enter SP1, use UP
button to increase conversion speed, the maxi-
mums speed is SP9.
5. Sound Control
Choose, press ENTER button to confirm. Use
UP/DOWN button to select ON (Sound control on)
or OFF (Sound control off), then press ENTER but-
ton to save it. After 10 seconds or press MENU for
long time to return to main menu.
P. 6
Tecshow Dualtec 3 in 1 |
English version
6. Sound Sensitivity
Choose,
UP/DOWN button to adjust the sensitivity value
from no sound control 0 to the max 100, after
selection, then press ENTER button to save it. After
10 seconds or press MENU for long time to return
to main menu.
7. LED display
Choose,
Use UP/DOWN button to select ON (display on) or
OFF (display off) mode, after selection, then press
ENTER button to save it. After 10 seconds or press
MENU for long time to return to main menu.
8. Display Nixie tube the normal and in-
version show
Choose (Normal), press ENTER button to
confirm, then enter
tion, press MENU button to enter the mode that
has been selected.After 10 seconds or press MENU
for long time to return to main menu.
9. Test
,
Press MENU button to
the led display will strobe, the light will run built-
in program to test, press MENU to back to main
menu.
10. Working time
Press MENU button to
it will show the working time on the display. Press
MENU to back to main menu.
11. Program version
Press MENU button to
it will show the Program version on the display.
Press MENU to back to main menu.
press ENTER button to confirm. Use
press ENTER button to confirm.
(Inversion), after selec-
, press ENTER button,
, press ENTER button,
, press ENTER button,