Publicidad
Idiomas disponibles
Idiomas disponibles
42
PROGRAMMING MODE - SETUP MODE
12-1. Pause function setup
Pause function setup can be used to enable/disable the ability to pause the cycle when pressing the
Start/Pause button.
Enter setup mode.
You will see LqC1
Press the Hot button.
Press the Warm or the Cold button until
in the display.
Press the Start button.
Press the Warm or the Cold button until
in the display.
Press the Start button.
Display
.
Press the Start button.
Press Warm or Cold button and then select
or
.
Disable
Enable
Press the Start button.
The machine sets up the pause function, then advances
to the next process automatically.
1. Continue to set up the next mode.
2. Stop the change of setup value and go back to ready
mode.
• Coin type - Turn on/off toggle switch.
• Card type - Pull the service card.
• All types - Push the Hot button three times.
Button
Display
appears
appears
One or the other
will display.
Publicidad
