Tristar SZ-1910 Manual De Usuario página 4

instruction manual
PaRTS DeSCRIPTIoN
1. On/off switch pedal
2. Handle
3. Cord rewinding pedal
4. Power regulating switch
5. Front cover
6. Hose socket
7. Airflow indicator
8. Bottom bracket
9. Outlet board
10. Parking hook
11. Wheel
12. Power cord
13. Combi nozzle
14. Tube
15. Hose
16. Floor brush
11
1
10
13
4
vacuum cleaner
14 15 16
BeFoRe The FIRST uSe
• Assemble the nozzle, the tube and hose.
• Pull out the main cable to the full length and plug into the main supply.
Note that you don't exceed the red mark when pulling out the cord. The
yellow mark shows you the ideal length of the cable.
• Switch on by pressing the On/off switch-button and select the suction
power by moving the power regulation switch.
9
uSe
6
• Connect the hose accessories: press the adaptors at both side of the hose
end, then insert the hose into the hose socket.
5
• Connect the metal tube to the curved end of hose.
7
• Connect the different nozzle tools/floor brush to the tube for different
cleaning purposes. The floor brush has two positions, soft/textile surfaces.
The combo nozzle is for narrow surfaces.
• Turn on the appliance: Hold the plug and pull out the cord, then insert the
plug into the power socket. Make sure that the power supply corresponds
to the required power mentioned on the rating label. Press the on/off switch
4
pedal to turn on the power. Adjust power to the required level.
• Turn off the appliance: After using, press the on/off switch pedal, the
3
appliance is turned off. Pull the plug out of the power socket, press the cord
rewinding pedal, the power cord will be drawn in.
• To move the appliance from room to room, unplug and carry it by using the
2
handle. Never pull the appliance by its cord when moving
8
12