Descargar Imprimir esta página

PowerWalker VFI 1000 LCD Manual Del Usuario página 5

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 62
2. Installation and setup
NOTE: Before installation, please inspect the unit. Be sure that nothing inside the package is
damaged. Please keep the original package in a safe place for future use.
NOTE: There are two different types of online UPS: standard and long-run models. Please
refer to the following model table.
2-1. Rear panel view
1000(L) / 1500(L) TOWER
1000(L)/1500(L) RACK
1. Programmable outlets: connect to non-critical loads.
2. Output receptacles: connect to mission-critical loads.
3. AC input
4. Input circuit breaker
5. Network/Fax/Modem surge protection
6. Emergency power off function connector (EPO)
7. USB communication port
8. RS-232 communication port
9. SNMP intelligent slot
10. External battery connection (only available for L model)
11. Output terminal
12. Output circuit breaker
Model
Type
1000
1500
Standard
2000
3000
2000(L) TOWER
2000(L) RACK
Model
Type
1000L
1500L
Long-run
2000L
3000L
4
3000(L) TOWER
3000(L) RACK
EN

Publicidad

loading