Weight Defrost; Sensor Cook - Haier HMC1285SESS Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

OPERATION INSTRUCTIONS CONT.
• Use only the package weight, or
results will be unsatisfactory and
popcorn may scorch.
• If popcorn is undercooked after the
countdown, use Start/+30Sec/Select
to add additional cooking time.

WEIGHT DEFROST

Weight Defrost will automatically set
the defrosting time and power level to
give even defrosting results.
1. Press the Weight Defrost button, the
oven will display "d-1."
2. Turn the dial to select the weight of
the food (Between 4-100OZ), and the
"OZ" light will turn on.
3. Press the Start/+30sec/Select button
to begin defrosting.
Conversion Guide
Weight of food in Lbs
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
TIME DEFROST
1. Press the Time Defrost button, the
oven will display "d-2."
2. Turn the dial to select the time, to a
maxium of 95 minutes.
3. Press the Start/+30sec/Select button
to begin defrosting.
NOTE: Power level for Time Defrost is
preset at 30%.

SENSOR COOK

Sensor Cooking is a technology
designed to detect the increasing
humidity released by food during the
cooking process. As food cooks in a
microwave oven, steam is produced.
Once steam is detected by the sensor,
the microwave will automatically
calculate and adjust the remaining
cooking time for the type and amount
of food. Sensor Cooking simplifies
microwave programming with excellent
cooking results.
1. Press the Sensor Cook button.
2. Turn the dial to select the desired
3. Press the Start/+30sec/Select button
Enter Weight in OZ
NOTE: For best results, do not use one
1-2
of the sensor cook food categories
3
twice in succession on the same food
4-5
portion -- this may result in severely
6-7
overcooked or burnt food. If there
8
is a need to continue cooking, it is
9-10
suggested to use the manual controls,
instead of Pre-set Sensor Cooking
11
12-13
• The oven door should not be opened
14-15
PAGE 16 • SET UP & USE
food type.
to start cooking.
while the sensor cook is on. Opening
the door may cause inaccurate
cooking results. Once the two beep
signal is heard, the remaining cooking
time immediately appears in the
screen and begins to count-down.
At this time, the oven door may be
opened to stir, turn, or add food.

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido