Descargar Imprimir esta página

Sauder Hammond Serie Instrucciones De Montaje página 36

Ocultar thumbs Ver también para Hammond Serie:

Publicidad

Step 30
å
Refer to the enlarged diagram to identify the parts on
the HINGES.
å
The DOOR may need some adjustments. Follow the text
below to make needed adjustments.
å
DOOR ADJUSTMENTS:
To adjust the DOOR from side to side (horizontal), turn the
adjusting screw in or out.
å
To adjust the DOOR up and down (vertical), loosen four vertical
adjustment screws. Move the DOOR up or down to the desired
location. Tighten the screws after making adjustments.
å
To adjust the DOOR in or out (depth), loosen the mounting
screw one turn and move the DOOR in or out, as needed.
Tighten the mounting screw after making adjustments.
Page 36
Mounting screw (depth)
(vertical adjustment)
www.sauder.com/service
Adjusting screw (horizontal)
431249

Publicidad

loading

Este manual también es adecuado para:

Hammond 431249