Publicidad
Idiomas disponibles
Idiomas disponibles
reverse the plug. If it still does not fit, contact a qualified electrician. Do not
attempt to subvert this safety feature.
To Change the fuse
The following should ONLY be conducted by a qualified professional:
1. Grasp plug and remove from the electrical receptacle. Do not unplug
by pulling on the cord.
2. Open the fuse cover by sliding the fuse access cover on the top of the
plug toward the blades as shown in the diagram below.
3. Remove fuse carefully. Push the fuse from the other side or turn fuse
holder upside down to remove fuse.
4. Risk of fire. Replace the fuse only with 5 Amp, 125 Volt fuse.
5. Close fuse cover by sliding the fuse access cover on the top of the plug
away from the blades.
6. Risk of fire. Do not replace the polarized plug as it contains a safety
device that should not be removed.
Discard product if the polarized plug is damaged.
Publicidad
