Sauder Rollingwood Serie Instrucciones De Montaje página 19

Step 13
å
Fasten one EXTENSION RAIL (1) to the LEFT END (C). Use
three 1/2" PAN HEAD SCREWS (24).
å
NOTE: For the EXTENSION RAIL, turn a SCREW into
the hole shown in the enlarged diagram. Then, slide the
inner cartridge of the EXTENSION RAIL in to find the
other holes that line up with the holes in the END. Turn a
SCREW into these holes.
1/2" PAN HEAD SCREW
(3 used in this step)
Open end
431407
24
1
www.sauder.com/service
C
7
Page 19