Publicidad
Enlaces rápidos
CONTACT US FIRST
CONTACT US FIRST
sauder.com
sauder.com
sauder.com
BEFORE MAKING ANY RETURNS TO THE STORE.
BEFORE MAKING ANY RETURNS TO THE RETAILER.
sauder.com/service
Visit
Prefer the phone? Give us a ring at
Customer Service is available Monday-Friday - 9 a.m. to 5:30 p.m. EST (except holidays)
Executive Desk
Steel River Collection | Model 427854
Sauder.com
Share your journey!
to order replacement parts, view video assembly tips, or chat with a live rep.
1-800-445-1527
.
Business or pleasure.
Works both ways.
NOTE: THIS INSTRUCTION
BOOKLET CONTAINS IMPORTANT
SAFETY INFORMATION.
PLEASE READ AND KEEP FOR
FUTURE REFERENCE.
English pg 1-44
Français pg 45-50
Español pg 51-56
Lot # 558205
Purchased: __________________
11/19/20
Publicidad
Manuales relacionados para Sauder Steel River 427854
Resumen de contenidos para Sauder Steel River 427854
- Página 1 CONTACT US FIRST CONTACT US FIRST sauder.com sauder.com sauder.com BEFORE MAKING ANY RETURNS TO THE STORE. BEFORE MAKING ANY RETURNS TO THE RETAILER. sauder.com/service Visit to order replacement parts, view video assembly tips, or chat with a live rep. 1-800-445-1527 Prefer the phone? Give us a ring at Customer Service is available Monday-Friday - 9 a.m.
- Página 2 LEFT UPRIGHT (1) SMALL DRAWER BOTTOM (2) OO BRACE (6) RIGHT UPRIGHT (1) SMALL RIGHT DRAWER FRONT (1) CROSS BRACE (1) BACK (2) LARGE LEFT DRAWER FRONT (1) NARROW EXTENSION BLOCK (4) LARGE LEFT DRAWER SIDE (2) Page 2 www.sauder.com/service 427854...
- Página 3 Now you know Part Identification our ABCs. 427854 www.sauder.com/service Page 3...
- Página 4 GLIDE - 4 GLIDE - 4 CAM SCREW - 46 HIDDEN CAM - 46 WOOD DOWEL - 10 BRACKET - 14 GROMMET WITH APPLIQUE CARD - 7 L-WRENCH - 1 BUMPER CARD - 1 CAP - 2 Page 4 www.sauder.com/service 427854...
- Página 5 1-9/16" TAPERED MACHINE SCREW - 4 1-3/16" PAN HEAD SCREW - 46 1" MACHINE SCREW - 5 9/16" FLAT HEAD SCREW - 8 1/2" HEX HEAD SCREW - 16 1/2" PAN HEAD SCREW - 28 1/2" FLAT HEAD SCREW - 32 427854 www.sauder.com/service Page 5...
- Página 6 The arrow in the HIDDEN CAM must point Arrow toward the hole in the edge of the board. Hidden Cam Hole Insert the CAM SCREW or CAM DOWEL into the HIDDEN CAM. Tighten the HIDDEN CAM. Page 6 www.sauder.com/service 427854...
- Página 7 Step 1 Look for this icon. It means a video assembly tip is available at www.sauder.com/service/tips Find the numbered video or scan the QR code. å Assemble your unit on a carpeted floor or on the empty carton to avoid scratching your unit or the floor.
- Página 8 1/2" PAN HEAD SCREW (4 used for the BRACKETS) The post must be here. 2" PAN HEAD SCREW (4 used for the ENDS) Edge with HIDDEN CAMS The post must be here. Page 8 www.sauder.com/service 427854...
- Página 9 (8 used in this step) This hole is closer to this edge. The post must be here. This hole is closer to this edge. The post must be here. This hole is closer to this edge. 427854 www.sauder.com/service Page 9...
- Página 10 NOTE: The SHORT EXTENSION SLIDES will be used later for the SMALL DRAWERS. 1/2" FLAT HEAD SCREW (4 used in this step) Open end Push the black lever and pull the SLIDE from the RAIL. The post must be here. Open end Page 10 www.sauder.com/service 427854...
- Página 11 NOTE: The LONG EXTENSION SLIDES will be used later for the LARGE DRAWERS. 1/2" FLAT HEAD SCREW (4 used in this step) Push the black lever and pull the SLIDE from the RAIL. Open end The post must be here. 427854 www.sauder.com/service Page 11...
- Página 12 Step 6 å Fasten four BRACKETS (12) to the END FRAMES (JJ and KK) exactly as shown. Use four 1/2" PAN HEAD SCREWS (22). 1/2" PAN HEAD SCREW (4 used in this step) Page 12 www.sauder.com/service 427854...
- Página 13 NOTE: The holes in the BRACE should be toward the bottom edge of your unit. 1/2" HEX HEAD SCREW (6 used in this step) The hole must be closer to The holes in the this edge. BRACES should face each other. Bottom edge Bottom edge 427854 www.sauder.com/service Page 13...
- Página 14 S u r o l e r e h i t h f a c S u r 1/2" PAN HEAD SCREW (4 used in this step) Page 14 www.sauder.com/service 427854...
- Página 15 H I D D E N i t h o S u r f a c H I D D E N i t h 1-3/16" PAN HEAD SCREW (4 used in this step) 427854 www.sauder.com/service Page 15...
- Página 16 å Insert two WOOD DOWELS (11) into the SHELVES (B and C). you do this, the sooner you do something else. å Push four HIDDEN CAMS (10) into the SHELVES (B and C). (8 used) Arrow Page 16 www.sauder.com/service 427854...
- Página 17 Step 11 å Fasten the SHELVES (B and C) to the ENDS (H and J) and BACKS (N). Tighten eight HIDDEN CAMS. å NOTE: Be sure the WOOD DOWELS in the SHELVES insert into the ENDS. 427854 www.sauder.com/service Page 17...
- Página 18 å Fasten two BRACKETS (12) to the UPRIGHT FRAMES (LL and NN) exactly as shown. Use two 1/2" PAN HEAD SCREWS (22). 1/2" PAN HEAD SCREW (2 used in this step) The post must be here. Page 18 www.sauder.com/service 427854...
- Página 19 å Turn two CAM SCREWS (9) into each surface of the UPRIGHTS (K and L) exactly as shown. å Push eight HIDDEN CAMS (10) into the UPRIGHTS (K and L). Arrow (8 used) (8 used) Arrow 427854 www.sauder.com/service Page 19...
- Página 20 NOTE: You should start each SCREW a few turns before completely tightening any of them. 1/2" PAN HEAD SCREW (2 used for the BRACKETS) The post must be here. 2" PAN HEAD SCREW (10 used for the UPRIGHTS) Page 20 www.sauder.com/service 427854...
- Página 21 (4 used in this step) Push the black lever and pull the SLIDE from the RAIL. Open end The post must be here. This hole is closer to this edge. Open end This hole is closer to this edge. 427854 www.sauder.com/service Page 21...
- Página 22 9/16" FLAT HEAD SCREW (4 used in this step) Push the black lever and pull the SLIDE from the RAIL. Open end This hole is closer to this edge. Open end This hole is closer to this edge. Page 22 www.sauder.com/service 427854...
- Página 23 Step 17 å Fasten four BRACKETS (12) to the UPRIGHT FRAMES (LL and NN) exactly as shown. Use four 1/2" PAN HEAD SCREWS (22). 1/2" PAN HEAD SCREW (4 used in this step) 427854 www.sauder.com/service Page 23...
- Página 24 UPRIGHT. å Fasten the posts on the LEFT UPRIGHT FRAME (LL) to the BRACES (OO). Tighten three 1/2" HEX HEAD SCREWS (21) using the L-WRENCH (14). 1/2" HEX HEAD SCREW (3 used for the BRACES) Page 24 www.sauder.com/service 427854...
- Página 25 UPRIGHT. å Fasten the posts on the RIGHT UPRIGHT FRAME (NN) to the BRACES (OO). Tighten three 1/2" HEX HEAD SCREWS (21) using the L-WRENCH (14). 1/2" HEX HEAD SCREW (3 used for the BRACES) 427854 www.sauder.com/service Page 25...
- Página 26 Fasten the BRACKETS on the UPRIGHT FRAMES (LL and NN) to the BOTTOMS (D and E). Use four 1/2" Now might be a PAN HEAD SCREWS (22). good time to refresh your drink. 1/2" PAN HEAD SCREW (4 used in this step) Page 26 www.sauder.com/service 427854...
- Página 27 Fasten two WIDE EXTENSION BLOCKS (F) to the UPRIGHTS (K and L). Use four 1-3/16" PAN HEAD SCREWS (18). This hole is closer to this edge. 1-3/16" PAN HEAD SCREW (4 used in this step) This hole is closer to this edge. 427854 www.sauder.com/service Page 27...
- Página 28 NOTE: The SHORT EXTENSION SLIDES will be used later for the PENCIL DRAWER. Use these holes. Open end Push the black lever and pull the SLIDE from the RAIL. 1/2" FLAT HEAD SCREW (4 used in this step) Open end Page 28 www.sauder.com/service 427854...
- Página 29 Push four HIDDEN CAMS (10) into the MODESTY PANEL (G). å Fasten the MODESTY PANEL (G) to the UPRIGHTS (K and L). Tighten four HIDDEN CAMS. Arrow Arrow i t h f a c S u r D E N H I D 427854 www.sauder.com/service Page 29...
- Página 30 Fasten the CROSS BRACE (PP) to the back edges of the UPRIGHT FRAMES (LL and NN). Tighten four 1/2" HEX HEAD SCREWS (21) using the L-WRENCH (14). 1/2" HEX HEAD SCREW (4 used in this step) Page 30 www.sauder.com/service 427854...
- Página 31 Fasten the TOP (A) to the UPRIGHTS (K and L) and END FRAMES (JJ and KK). Tighten four 1-9/16" TAPERED MACHINE SCREWS (17) using the L-WRENCH (14). (8 used) The large hole must be here. 1-9/16" TAPERED MACHINE SCREW (4 used for the END FRAMES) 427854 www.sauder.com/service Page 31...
- Página 32 å Insert a GROMMET WITH CAP (15) into each large hole in the TOP (A). å Peel the BUMPERS from the BUMPER CARD (24) and apply the BUMPERS to the SHELVES (B and C) as shown. Page 32 www.sauder.com/service 427854...
- Página 33 NOTE: You should start each SCREW a few turns before completely tightening any of them. Edge with holes 1-3/16" PAN HEAD SCREW (10 used in this step) The larger holes must be here. The larger holes must be here. 427854 www.sauder.com/service Page 33...
- Página 34 Push six HIDDEN CAMS (10) into the PENCIL DRAWER SIDES (R and S) and PENCIL DRAWER BOTTOM (T). å Fasten the PENCIL DRAWER FRONT (P) to the PENCIL DRAWER SIDES (R and S) and PENCIL DRAWER BOTTOM (T). Tighten six HIDDEN CAMS. Arrow Page 34 www.sauder.com/service 427854...
- Página 35 Fasten one KNOB SET (6) to the PENCIL DRAWER FRONT (P). Use one 1" MACHINE SCREW (19). 1/2" FLAT HEAD SCREW (4 used for the SLIDES) Open end Open end 1" MACHINE SCREW (1 used for the KNOB SET) Open end 427854 www.sauder.com/service Page 35...
- Página 36 Slide the SMALL DRAWER BOTTOM (Z) into the grooves in the SMALL DRAWER SIDES (V and X) and SMALL DRAWER BACK (Y). å Repeat this step for the other small drawer. 1-3/16" PAN HEAD SCREW (8 used in this step) Groove Page 36 www.sauder.com/service 427854...
- Página 37 SIDES (V and X). Tighten four HIDDEN CAMS. å Repeat this step for the other small drawer. The CAM SCREWS should be closer to this edge. (8 used) Be sure the DRAWER BOTTOM inserts into the DRAWER FRONT groove. Arrow (8 used) 427854 www.sauder.com/service Page 37...
- Página 38 FRONT (U). Use one 1" MACHINE SCREW (19). å Repeat this step for the other small drawer. 1/2" FLAT HEAD SCREW (8 used for the SLIDES) Open end Open end 1" MACHINE SCREW (2 used for the KNOB SETS) Open end Page 38 www.sauder.com/service 427854...
- Página 39 Slide the LARGE DRAWER BOTTOM (FF) into the grooves in the LARGE DRAWER SIDES (CC and DD) and LARGE DRAWER BACK (EE). 1-3/16" PAN HEAD SCREW (12 used in this step) å Repeat this step for the other large drawer. (4 used) Groove 427854 www.sauder.com/service Page 39...
- Página 40 Fasten the LARGE RIGHT DRAWER FRONT (HH) to the LARGE DRAWER SIDES (CC and DD). Tighten four HIDDEN CAMS. å Repeat this step for the other large drawer. (8 used) Be sure the DRAWER BOTTOM inserts into the DRAWER FRONT groove. Arrow (8 used) Page 40 www.sauder.com/service 427854...
- Página 41 FRONT (HH). Use one 1" MACHINE SCREW (19). å Repeat this step for the other large drawer. 1/2" FLAT HEAD SCREW (8 used for the SLIDES) Open end Open end 1" MACHINE SCREW (2 used for the KNOB SETS) Open end 427854 www.sauder.com/service Page 41...
- Página 42 Step 36 å Using your Adjustable Wrench, take the LOCK SET (5) apart. å Fasten the LOCK SET (5) to the LARGE RIGHT DRAWER FRONT (HH) exactly as shown. Be sure the tab is facing down. Page 42 www.sauder.com/service 427854...
- Página 43 Press the FILE GLIDES (7 and 8) onto the LARGE DRAWER SIDES (CC and DD), LARGE DRAWER Almost time to BACK (EE), and LARGE DRAWER BRACE (GG). celebrate! With a nap. å Repeat this step for the other large drawer. 427854 www.sauder.com/service Page 43...
- Página 44 NOTE: Please read the back pages of the instruction booklet for important safety information. å This completes assembly. Clean with a damp cloth. Wipe dry. And to celebrate, why not share your success story at sauder.com or 35 lbs. 35 lbs.
- Página 45 DESCRIPTION QUANTITÉ REFERENCE DESCRIPTION QUANTITÉ conserver le livret pour future référence. Pour contacter Sauder en DESSUS ................1 (ENSEMBLE DE GLISSIÈRE ILLUSTRÉ À PART) ce qui concerne cet TABLETTE GAUCHE ..........1 GLISSIÈRE D'EXTENSION LONGUE ....4 TABLETTE DROITE .............1 élément, faire référence COULISSE D'EXTENSION LONGUE ....4...
- Página 46 KK) exactement comme il l’est indiqué. Utiliser quatre VIS TÊTE ÉTAPE 3 GOUTTE DE SUIF 13 mm (22). Fixer quatre BLOCS D’EXTENSION LARGES (F) aux EXTRÉMITÉS (H et J) exactement comme il l’est indiqué. Utiliser huit VIS TÊTE GOUTTE DE SUIF 30 mm (18). Page 46 www.sauder.com/service 427854...
- Página 47 VIS dans ce trou. des MONTANTS (K et L) comme il l’est indiqué. REMARQUE : Les LONGUES COULISSES D'EXTENSION seront Enfoncer huit EXCENTRIQUES ESCAMOTABLES (10) dans utilisées ultérieurement pour les GRANDS TIROIRS. les MONTANTS (K et L). 427854 www.sauder.com/service Page 47...
- Página 48 Fixer le DESSUS (A) aux MONTANTS (K et L) et aux CADRES DE MONTANT (JJ et KK). Serrer quatre VIS À MÉTAUX EFFILÉS 40 mm (17) à l’ a ide de la CLÉ EN L (14). Page 48 www.sauder.com/service 427854...
- Página 49 à chaque VIS avant de les serrer toutes à bloc. Enfiler le FOND DE GRAND TIROIR (FF) dans les rainures des CÔTÉS DE GRAND TIROIR (CC et DD) et l'ARRIÈRE DE GRAND TIROIR (EE). Répéter cette étape pour l'autre grand tiroir. 427854 www.sauder.com/service Page 49...
- Página 50 Ceci complète l'assemblage. Nettoyer avec un tissu humide. Essuyer. ÉTAPE 36 À l’ a ide d’une clé réglable, démonter le JEU DE SERRURES (5). Fixer le JEU DE SERRURES (5) au DEVANT DROIT DE GRAND TIROIR (HH) exactement comme il l’est indiqué. Page 50 www.sauder.com/service 427854...
- Página 51 Si ESTANTE IZQUIERDO ..........1 RIEL DE EXTENSIÓN LARGO ......4 necesita ponerse en ESTANTE DERECHO ..........1 contacto con Sauder en CORREDERA DE EXTENSIÓN LARGA ..4 FONDO IZQUIERDO ..........1 cuanto a esta unidad, RIEL DE EXTENSIÓN CORTO ......6 FONDO DERECHO .............1 refiérase al número...
- Página 52 Utilice cuatro TORNILLOS DE PASO 3 CABEZA REDONDA de 13 mm (22). Fije cuatro BLOQUES DE EXTENSIÓN ANCHOS (F) a los EXTREMOS (H y J) exactamente como se muestra. Utilice ocho TORNILLOS DE CABEZA REDONDA de 30 mm (18). Page 52 www.sauder.com/service 427854...
- Página 53 Gire dos BIELAS DE EXCÉNTRICO (9) en cada superficie de los más tarde para los CAJONES GRANDES. PARALES (K y L) exactamente como se muestra. Empuje ocho EXCÉNTRICOS ESCONDIDOS (10) en los PARALES (K y L). 427854 www.sauder.com/service Page 53...
- Página 54 EXCÉNTRICOS ESCONDIDOS. Fije el PANEL SUPERIOR (A) a los PARALES (K y L) y los MARCOS DE EXTREMO (JJ y KK). Apriete cuatro TORNILLOS PARA METAL CÓNICOS de 40 mm (17) utilizando la LLAVE EN L (14). Page 54 www.sauder.com/service 427854...
- Página 55 Deslice el FONDO DE CAJÓN GRANDE (FF) en las ranuras de los LADOS DE CAJÓN GRANDE (CC y DD) y del DORSO DE CAJÓN GRANDE (EE). Repita este paso para el otro cajón grande. 427854 www.sauder.com/service Page 55...
- Página 56 Esto completa el ensamblaje. Limpiar con un trapo húmedo. PASO 36 Seque con un paño. Utilizando una llave ajustable, desarma el JUEGO DE CERRADURA (5). Fije el JUEGO DE CERRADURA (5) a la CARA DERECHA DE CAJÓN GRANDE (HH) exactamente como se muestra. Page 56 www.sauder.com/service 427854...
- Página 57 à Les téléviseurs peuvent être particulièrement un téléviseur. cet effet. lourds. De plus, le poids et l’emplacement du tube image ont tendance à rendre les téléviseurs instables et enclins à tomber vers l’ a vant. 427854 www.sauder.com/service Page 57...
- Página 58 Además, el peso y la ubicación del tubo de imagen tienden a causar la inestabilidad de televisores y propensa a volcarse hacia adelante. Page 58 www.sauder.com/service 427854...
- Página 59 à compter de la date d'achat la première fois et qui sont signalés à Sauder dans les limites de couverture de la contre tout défaut de matériaux ou de fabrication des composantes de mobilier Sauder.
- Página 60 BEFORE MAKING ANY RETURNS TO THE RETAILER. So, how did it go? Dear Valued Customer: Thanks so much for choosing Sauder® furniture. I hope the Set a world record for speed? purchase and assembly process was a positive experience Feeling good about yourself? and you feel good about the furniture you just built.