Sauder worksense PALO ALTO Serie Instrucciones De Montaje página 15

Step 9
å
To insert the SMALL DRAWER back into your unit, line up the EXTENSION SLIDES on the drawer
with the EXTENSION RAILS on the unit and push the drawer into the unit until the drawer is fully
inserted. The drawer will push in hard until it is all the way in, then it will slide in and out easier.
å
Pull the LARGE LEFT DRAWER (D) completely open. If necessary, unlock the LARGE DRAWER
with the KEY SET (23J).
å
Push a FILE GLIDE (6B) onto the LARGE LEFT DRAWER SIDE.
å
Slide the FILE RODS (8B) into the FILE GLIDE (6B) on the LARGE LEFT DRAWER SIDE.
å
Slide another FILE GLIDE (6B) onto the other end of the FILE RODS (8B), then press this FILE
GLIDE over the LARGE RIGHT DRAWER SIDE.
å
Repeat this step for the other LARGE DRAWER (D).
8B
6B
6B
D
23J
Insert the FILE RODS into the holes
of your choice in the FILE GLIDES,
depending on your file sizes.
www.sauder.com/commercial-office/service
8B
6B
6B
D
427796 Page 15