Sauder Briarbrook Serie Instrucciones De Montaje página 14

Step 9 Step
å
Carefully stand your unit upright and place on top of the 430075.
å
Fasten the FRAMES (H) to the 430075. Tighten four 3/8" HEX HEAD
SCREWS (11) using the L-WRENCH (5) and tighten the NUTS (4) onto
the 3/8" HEX HEAD SCREWS using the WRENCH (6) as shown in the
enlarged diagram.
å
NOTE: You should start each SCREW a few turns before completely
tightening any of them.
3/8" HEX HEAD SCREW
(4 used in this step)
Page 14
11
5
H
4
6
www.sauder.com/service
H
H
430076