Sauder Steel River Serie Instrucciones De Montaje página 19

Step 13
å
Fasten the RIGHT END (D) to the BACK (E). Tighten two HIDDEN CAMS.
å
Fasten the BOTTOM (B) to the RIGHT END (D). Use two 1-3/16" PAN HEAD SCREWS (16).
å
Fasten the RIGHT END (D) to the FRONT LEG (M). Use three 1/2" PAN HEAD SCREWS (20) through the BRACKETS
and into the RIGHT END.
å
NOTE: You should start each SCREW a few turns before completely tightening any of them.
Open end
M
1/2" PAN HEAD SCREW
(3 used for the RIGHT END)
427849
D
E
20
www.sauder.com/service
B
1
16
1-3/16" PAN HEAD SCREW
(2 used for the BOTTOM)
Page 19