Step 25
å
Fasten the LARGE LEFT DRAWER SIDE (Q) to the LARGE
DRAWER BACK (P). Use two 1-3/16" PAN HEAD SCREWS (16).
å
Insert one WOOD DOWEL (7) into the DRAWER BRACE (S).
å
Fasten the DRAWER BRACE (S) to the LARGE LEFT DRAWER
SIDE (Q). Use one 1-3/16" PAN HEAD SCREW (16).
å
NOTE: You should start each SCREW a few turns before
completely tightening any of them.
å
NOTE: Be sure the WOOD DOWEL in the DRAWER BRACE
inserts into the LARGE LEFT DRAWER SIDE.
Q
16
1-3/16" PAN HEAD SCREW
(3 used in this step)
427849
P
Notch
www.sauder.com/service
Groove
S
The larger hole will
be on the bottom.
7
Page 31