Sauder Portage Park Serie Instrucciones De Montaje página 21

Step 16
å
First, place the hutch on the 427478 top and return using the measurements provided in the enlarged diagram. Then
mark the holes in the FRAMES (K) with your pencil.
å
NOTE: Be sure to use the exact spacing for both ends of the FRAME (K) on the 427478 Return as shown in the
enlarged diagram.
å
Next, remove the hutch from the 427478 Top and Return. Then drill a 1/8" hole in the four marked locations of
your 427478 Top and Return.
å
Now, fasten the FRAMES (K) to the 427478 large top and return as shown. Use four 2" PAN HEAD SCREWS (10).
5/8" 5/8"
1-3/16" 1-3/16"
10
K
426281 www.sauder.com/service
10
2" PAN HEAD SCREW
(4 used in this step)
Pencil
Electric drill with 1/8" bit
K
Page 21