Resumen de contenidos para Sauder Portage Park 426294
Página 1
CONTACT US FIRST CONTACT US FIRST sauder.com sauder.com sauder.com BEFORE MAKING ANY RETURNS TO THE STORE. BEFORE MAKING ANY RETURNS TO THE RETAILER. sauder.com/service Visit to order replacement parts, view video assembly tips, or chat with a live rep. 1-800-445-1527 Prefer the phone? Give us a ring at Customer Service is available Monday-Friday - 9 a.m.
Página 2
Part Identification No. 2 Phillips Screwdriver Hardware Identification Tip Shown Actual Size Hardware Usage Guide Assembly Steps 6-18 Pencil Français 19-21 Electric drill with 1/8" or 3/8" bit Español 22-24 (ONLY in indicated step) Safety 25-26 Warranty Page 2 www.sauder.com/service 426294...
Página 3
While not all parts are labeled, some of the parts will have a label or an inked letter on the edge to help distinguish similar parts from each other. Use this part identification to help identify similar parts. TOP (1) LEFT END (1) RIGHT END (1) SHELF (2) BACK (1) BRACE (1) 426294 www.sauder.com/service Page 3...
Página 4
CAM SCREW - 8 WOOD DOWEL - 2 BACK CONNECTOR - 8 FURNITURE TIPPING APPLIQUE CARD - 2 METAL PIN - 8 RESTRAINT KIT - 1 1-9/16" PAN HEAD SCREW - 4 9/16" FLAT HEAD SCREW - 8 Page 4 www.sauder.com/service 426294...
Página 5
The arrow in the HIDDEN CAM must point Arrow toward the hole in the edge of the board. Hidden Cam Hole Insert the CAM SCREW or CAM DOWEL into the HIDDEN CAM. Tighten the HIDDEN CAM. 426294 www.sauder.com/service Page 5...
Página 6
Step 1 Look for this icon. It means a video assembly tip is available at www.sauder.com/service/tips Find the numbered video or scan the QR code. å Assemble your unit on a carpeted floor or on the empty carton to avoid scratching your unit or the floor.
Página 7
Step 2 å Push eight HIDDEN CAMS (1) into the ENDS (B and C) and BRACE (F). Arrow Arrow 426294 www.sauder.com/service Page 7...
Página 8
Step 3 å Fasten the BRACE (F) to the LEFT END (B). Tighten two HIDDEN CAMS. Surface with HIDDEN CAMS Page 8 www.sauder.com/service 426294...
Página 9
Step 4 å Fasten the RIGHT END (C) to the BRACE (F). Tighten two HIDDEN CAMS. 426294 www.sauder.com/service Page 9...
Página 10
Slide the BACK (E) into the grooves in the ENDS (B and C) and BRACE (F). With the palm of your hand, tap the BACK down into the groove. i s h e F i n f a c s u r Page 10 www.sauder.com/service 426294...
Página 11
Step 6 å Turn four CAM SCREWS (2) into the TOP (A). 426294 www.sauder.com/service Page 11...
Página 12
Fasten the TOP (A) to the ENDS (B and C). Tighten four HIDDEN CAMS. å NOTE: Be sure the WOOD DOWELS in the ENDS insert into the TOP. å NOTE: Be sure the BACK inserts into the groove in the TOP. Groove Page 12 www.sauder.com/service 426294...
Página 13
TOP (A), ENDS (B and C), BRACE (F), and BACK (E). Use eight 9/16" FLAT HEAD SCREWS (8) into the BACK CONNECTORS. 9/16" FLAT HEAD SCREW (8 used in this step) (8 used) Slide the lip into the groove, then fasten with screw. 426294 www.sauder.com/service Page 13...
Página 14
Step Step 9 å Insert the METAL PINS into the hole locations of your choice in the ENDS (B and C). Set the SHELVES (D) onto the METAL PINS. (8 used) Page 14 www.sauder.com/service 426294...
Página 15
426293. Below shows how to attach it to either unit. å Fasten the unit to either the 426275 or 426293. Use four 1-9/16" PAN HEAD SCREWS (7). 1-9/16" PAN HEAD SCREW (4 used in this step) 426294 www.sauder.com/service Page 15...
Página 16
- Fasten the unit to the wall. Use the LONG SCREW through the other end of the SAFETY STRAP and into the 1/8" hole. Electric drill with 1/8" bit Mark and drill a 1/8" hole into the wall stud. Use the short screw through the hole in the strap and into the TOP. Page 16 www.sauder.com/service 426294...
Página 17
NOTE: You will need to turn the LONG SCREW multiple turns to completely tighten and secure your unit to the wall. Electric drill with 3/8" bit Mark and drill a 3/8" hole into the wall. Squeeze the wings together and tap the wall anchor into the 3/8" hole in the wall. 426294 www.sauder.com/service Page 17...
Página 18
NOTE: Please read the back pages of the instruction booklet for important safety information. å This completes assembly. Clean with a damp cloth. Wipe dry. And to celebrate, why not share your success story at sauder.com or Page 18 www.sauder.com/service...
Página 19
REFERENCE DESCRIPTION QUANTITÉ REFERENCE DESCRIPTION QUANTITÉ conserver le livret pour future référence. Pour contacter Sauder en DESSUS ................1 EXCENTRIQUE ESCAMOTABLE .....8 ce qui concerne cet EXTRÉMITÉ GAUCHE ..........1 VIS D'EXCENTRIQUE ..........8 élément, faire référence EXTRÉMITÉ DROITE ..........1 CHEVILLE EN BOIS ...........2 au numéro de lot et...
Página 20
EXTRÉMITÉS (B et C), à l’ENTRETOISE (F) et à l’ARRIÈRE (E). Utiliser huit ÉTAPE 3 VIS TÊTE PLATE 14 mm (8) à travers les CONNECTEURS ARRIÈRES. Fixer l'ENTRETOISE (F) à l'EXTRÉMITÉ GAUCHE (B). Serrer deux EXCENTRIQUES ESCAMOTABLES. Page 20 www.sauder.com/service 426294...
Página 21
3-Percer un trou de 3 mm sur la marque et dans le montant dans le mur. 4-Fixer l’unité au mur. Utiliser la VIS LONGUE à travers l'autre extrémité de la SANGLE DE SÉCURITÉ et dans le trou de 3 mm. 426294 www.sauder.com/service Page 21...
Página 22
PANEL SUPERIOR ............1 EXCÉNTRICO ESCONDIDO .......8 su referencia futura. Si necesita ponerse en EXTREMO IZQUIERDO ..........1 BIELA DE EXCÉNTRICO ........8 contacto con Sauder en EXTREMO DERECHO ..........1 PASADOR DE MADERA .........2 cuanto a esta unidad, ESTANTE ................2 CONECTOR POSTERIOR ........8 refiérase al número...
Página 23
SUPERIOR (A), a los EXTREMOS (B y C), a la RIOSTRA (F) y al Fije la RIOSTRA (F) al EXTREMO IZQUIERDO (B). Apriete dos EXCÉNTRICOS ESCONDIDOS. DORSO (E). Pase ocho TORNILLOS DE CABEZA PERDIDA de 14 mm (8) a través de los CONECTORES POSTERIORES. 426294 www.sauder.com/service Page 23...
Página 24
3-Perfore un agujero de 3 mm en la marca y entre el soporte de madera de su pared. 4-Fije la unidad a la pared. Utilice el TORNILLO LARGO a través el otro extremo de la CORREA DE SEGURIDAD y en el agujero de 3 mm. Page 24 www.sauder.com/service 426294...
Página 25
Les téléviseurs peuvent être très lourds. De un téléviseur téléviseur. plus, le poids et l’emplacement du tube image ont tendance à rendre les téléviseurs instables et enclins à tomber vers l’ a vant. 426294 www.sauder.com/service Page 25...
Página 26
El soportar un televisor. diseñadas para soportar un televisor. peso y la ubicación del tubo de imagen tienden a causar la inestabilidad de televisores y por eso tendrán la tendencia a inclinarse hacia adelante. Page 26 www.sauder.com/service 426294...
Página 27
à compter de la date d'achat la première fois et qui sont signalés à Sauder dans les limites de couverture de la contre tout défaut de matériaux ou de fabrication des composantes de mobilier Sauder.
Página 28
BEFORE MAKING ANY RETURNS TO THE RETAILER. So, how did it go? Dear Valued Customer: Thanks so much for choosing Sauder® furniture. I hope the Set a world record for speed? purchase and assembly process was a positive experience Feeling good about yourself? and you feel good about the furniture you just built.