Sauder Rollingwood Serie Instrucciones De Montaje página 18

Step 13
å
Fasten the remaining EXTENSION RAIL (1) to the LEFT
END (D). Use three 1/2" PAN HEAD SCREWS (21).
å
NOTE: For the EXTENSION RAIL, turn a SCREW into
the hole shown in the enlarged diagram. Then, slide the
inner cartridge of the EXTENSION RAIL in to find the
other holes that line up with the holes in the END. Turn a
SCREW into these holes.
Open end
Page 18
1/2" PAN HEAD SCREW
(3 used in this step)
1
D
www.sauder.com/service
21
7
431439