Sauder Rollingwood Serie Instrucciones De Montaje página 38

Step 33
å
Fasten the PULLS (10) to the DOORS (G). Use four 3/4" MACHINE SCREWS (20).
å
Refer to the enlarged diagram to identify the parts on the HINGE.
å
The DOOR may need some adjustments. Follow the text below to make needed adjustments.
å
DOOR ADJUSTMENTS:
To adjust the DOOR from side to side (horizontal), turn the adjusting screw in or out.
å
To adjust the DOOR up and down (vertical), loosen both vertical adjustment screws. Move the
DOOR up or down to the desired location. Tighten the screws after making adjustments.
å
To adjust the DOOR in or out (depth), loosen the mounting screw one turn and move the DOOR in
or out, as needed. Tighten the mounting screw after making adjustments.
Page 38
Mounting screw (depth)
G
10
3/4" MACHINE SCREW
www.sauder.com/service
Adjusting screw (horizontal)
(vertical adjustment)
G
10
20
(4 used in this step)
17
431439