Sauder Manhattan Gate Serie Instrucciones De Montaje página 13

Step 8
å
Fasten two EXTENSION RAILS (1) to the LEFT END (B). Use six 3/8" PAN HEAD
SCREWS (18) through the exact holes shown.
å
NOTE: For each EXTENSION RAIL, turn a SCREW into the hole shown in the
enlarged diagram. Then, slide the inner cartridge of the EXTENSION RAIL in to find
the other holes that line up with the holes in the END. Turn a SCREW into these holes.
429249
18
3/8" PAN HEAD SCREW
(6 used in this step)
1
www.sauder.com/service
Open end
1
B
1
Open end
Page 13