Publicidad
Idiomas disponibles
Idiomas disponibles
12
Sentry Tube Heaters
3. Slide on hangers and connect to chains.
4. Connect and hang remaining tubes. Follow the procedures
given in Step 2.
5. The tube assembly should be either hung level, or
with a downward slope away from the burner box not
exceeding 1 in. for every 10 ft. of tube.
FIG. 7
NON-SWAGED
TUBE END
SWAGED
TUBE
ON BOX
CLAMP
Owner's Manual • Sentry
POSITION CLAMP
EVENLY
TUBE WELD
SEAM DOWN
HANGER
TUBE WELD SEAM
45 DEGREE ANGLE INSTALLATION
THIS
CLAMP
BOLTS
UP
OVERHEAD INSTALLATION
THIS
CLAMPS MUST BE CENTERED OVER
SWAGED AND NON-SWAGED ENDS OF
CLAMP
NOT THIS
TUBES
Publicidad
