emmeti TAM-15 Manual De Instalacion Y Uso página 55

Reversed "Stop adjustment" function (closed contact = stop
12
adjustment) - display shows the "
(absent) icon.
Reversed "Stop adjustment" (open contact = stop adjustment)
13
- display shows the "
Reversed "Stop adjustment" (open contact = stop adjustment)
14
- display shows the "
"Thermostat ON / OFF" function (closed contact = thermostat
15
off).
Reversed "thermostat ON / OFF" function (contact closed =
16
thermostat on).
"Motor alarm" function (closed contact = alarm) - display
17
shows the " " icon.
Reversed "Motor alarm" function (open contact = alarm). -
18
display shows the "
Resistor alarm (closed contact = alarm, flashing "
19
" " icons).
Reversed resistor alarm (open contact = alarm, flashing
20
" " + " " icons).
Dirty filter warning: closed contact = dirty filter icon
21
" " flashing.
Reversed dirty filter warning: open contact = dirty filter icon
22
" " flashing.
23
Motor rpm control input (applies to input 16 only).
" (present) or "
" icon.
" icon.
" icon.
Table 5: C20 parameter - On/Off " " button limitation .
"
VALUE
0
OFF  ON  RDC
1
OFF  ON
2
OFF  RDC
3
OFF
4
ON  RDC
5
ON
6
RDC
7
No function
" +
55
DESCRIPTION