Safety Notice
EN
41
14. Check that operation of the unit does not result in prolonged impairment of
the circulation of the patient.
15. Product is designed for its intended use only. Do not misuse in any way.
16. Product is not intended for infants or individuals who cannot express their
intentions.
17. Prolonged over-inflation of the bladder may cause ecchymoma of your arm.
18. Do not disassemble the unit or arm cuff. Do not attempt to repair.
19. Use only the approved arm cuff for this unit. Use of other arm cuffs may
result in incorrect measurement results.
20. The system might produce incorrect readings if stored or used outside the
manufacturer's specified temperature and humidity ranges. Make sure to store
the blood pressure monitor, children, pets and pests are outside of accessible
range.
21. Do not use the device near strong electrical or electromagnetic fields gene-
rated by cell phones or other devices, they may cause incorrect readings and
interference or become interference source to the device.
22. Do not mix new and old batteries simultaneously
23. Replace batteries when Low Battery Indicator "
"appears on screen.
Replace both batteries at the same time.
24. Do not mix battery types. Long-life alkaline batteries are recommended.
25. Remove batteries from device when not in operation for more than 3
months.
26. Do not insert the batteries with their polarities incorrectly aligned.
27. Dispose batteries properly; observe local laws and regulations.
28. Only use a recommended AC adaptor double-insulated complying with
EN 60601-1 and EN 60601-1-2.An unauthorized adapter may cause fire and
electric shock.
29.
Advising operator that Instruction manual/ Booklet must be consulted .
30. Do not use the device during transport vehicles for influencing measure-
ment accuracy, such as patient transport in an ambulance or helicopter.
31. Contains small parts that may cause a chocking hazard if swallowed by
infants.
32. Please align the polarities of each battery with the +ve and -ve signs
imprinted on the battery housing when you replace the batteries.
www.spengler.fr