Spengler TENSONIC Manual página 57

Unit Operation
Troubleshooting
Problem
Blood pressure
results are not
within typical
range
" " displayed
Possible Cause
Cuff is too tight or not
properly positioned on
the arm
Inaccurate test results
due to body movement
or monitor movement
Cuff fails to inflate
properly
Improper operation
Pressurization is over
300mmHg
Solution
Firmly reposition cuff
approximately 1-2cm (1/2")
above the elbow joint (See
Page 50)
Sit in a relaxed position
with arm placed near heart.
Avoid speaking or moving
body parts while testing.
Make sure the monitor unit
is placed in a stationary
position throughout the tes-
ting period. ( See Page 46)
Make sure hose is properly
fastened to cuff and moni-
tor unit.
Read user manual carefully
and re-test properly.
Read user manual carefully
and re-test properly.
EN
57
www.spengler.fr