Bose DesignMax DM10P-SUB Guia De Instalacion página 2

Important Safety Instructions
Please read and keep all safety and use instructions.
This product is intended for installation by professional installers only! This document is
intended to provide professional installers with basic installation and safety guidelines for this
product in typical fixed-installation systems. Please read this document and all safety warnings
before attempting installation.
Do not attempt to service this product yourself. Refer all servicing to authorized service centers,
installers, technicians, dealers or distributors. To contact Bose Professional or to find a dealer or
distributor near you, visit BoseProfessional.com.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer's
instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produces heat.
9. Only use attachments/accessories specified by the manufacturer.
Product Ratings:
Input Voltage: 70V/100V
Impedance: 8 Ω, 250 W
Current or Power: (70V): 20W, 40W, 80W, 150W; (100V): 40W, 80W, 150W
Regulatory Information
This product conforms to all applicable EU directive requirements. The complete
declaration of conformity can be found at: www.Bose.com/compliance.
This product conforms to all applicable Electromagnetic Compatibility Regulations
2016 and all other applicable UK regulations. The complete declaration of
conformity can be found at: www.Bose.com/compliance
This symbol means the product must not be discarded as household waste, and
should be delivered to an appropriate collection facility for recycling. Proper
disposal and recycling helps protect natural resources, human health and the
environment. For more information on disposal and recycling of this product,
contact your local municipality, disposal service, or the shop where you bought this
product.
Date of Manufacture: The eighth digit in the serial number indicates the year of manufacture;
"7" is 2007 or 2017.
China Importer: Bose Electronics (Shanghai) Company Limited, Part C, Plant 9,
No. 353 North Riying Road, China (Shanghai) Pilot Free Trade Zone
EU Importer: Bose Products B.V., Gorslaan 60, 1441 RG Purmerend, The Netherlands
Mexico Importer: Bose de México, S. de R.L. de C.V. , Paseo de las Palmas 405-204, Lomas de
Chapultepec, 11000 México, D.F. For importer & service information: +5255 (5202) 3545
Taiwan Importer: Bose Taiwan Branch, 9F-A1, No. 10, Section 3, Minsheng East Road,
Taipei City 104, Taiwan. Phone Number: +886-2-2514 7676
UK Importer: Bose Limited, Bose House, Quayside Chatham Maritime, Chatham, Kent,
ME4 4QZ, United Kingdom
Bose is a trademark of Bose Corporation.
DesignMax is a trademark of Transom Post OpCo LLC.
Bose Corporation, Framingham, MA 01701, U.S.A. 1-877-230-5639
©2023 Transom Post OpCo LLC. No part of this work may be reproduced, modified, distributed
or otherwise used without prior written permission.
Warranty Information
This product is covered by a limited warranty.
For warranty details, visit BoseProfessional.com/Warranty.
2 • English
WARNINGS/CAUTIONS
This product contains magnetic material. Consult your physician on whether
this might affect your implantable medical device.
Contains small parts which may be a choking hazard. Not suitable for
children under age 3.
• This product is intended for indoor use only.
• All Bose Professional products must be installed in accordance with local, state,
federal and industry regulations. It is the installer's responsibility to ensure
installation of the loudspeakers and mounting system is performed in accordance
with all applicable codes, including local building codes and regulations. Consult the
local authority having jurisdiction before installing this product.
• Unsafe mounting or overhead suspension of any heavy load can result in serious
injury or death, and property damage. It is the installer's responsibility to evaluate
the reliability of any mounting method used for their application. Only professional
installers with the knowledge of proper hardware and safe mounting techniques
should attempt to install any loudspeaker overhead.
• Do not mount the product in locations where it may be exposed to water or
condensation.
• Do not expose this product to dripping or splashing, and do not place objects filled
with liquids, such as vases, on or near the product.
• Do not mount on surfaces that are not sturdy, or that have hazards concealed behind
them, such as electrical wiring or plumbing. Ensure the bracket is installed by a
qualified professional installer and in accordance with local building codes.
• Use only the hardware and accessories included or specified by Bose Professional
for use with DesignMax DM10P-SUB loudspeakers. For information on compatible
accessories, see the product's technical data sheet at BoseProfessional.com.
• Keep the product away from fire and heat sources. Do not place naked flame sources,
such as lighted candles, on or near the product.
• Do not make unauthorized alterations to this product.
• Do not expose loudspeaker or mounting components to any chemical substances
that are not specified by Bose Professional, including but not limited to lubricants,
cleaning agents, contact sprays, or hydrocarbon-based solvents. Exposure to such
substances can lead to degradation of the plastic material, resulting in cracking and
creating a falling hazard.
• Clean speakers using only a dry cloth. Do not expose loudspeaker to soap, detergent,
mineral oil, alcohol or other cleaning agents or chemicals.
Cable-specific Warnings:
• The cable is not intended for installation or use in indoor water facility areas
(including, without limitation, indoor pools, indoor water parks, hot tub rooms,
saunas, steam rooms and indoor skating rinks).
• Do not use for lifting, such as a crane or pulley, or for hanging installations that
include movement or dynamic behavior. Intended for hanging static loudspeakers
only.
• Do not walk or stand on the cable installation.
• Do not paint the cable fastener or any other part of the cable assembly.
• If using a cable system not supplied by Bose Professional, the working load
limit must be equal to or greater than the supplied cable system. See Technical
Specifications for Safe Working Load.
• Do not apply oil or any other lubricant to the cable fastener or any other part of the
cable assembly.
• Never join two cables together. Only use one cable assembly per loudspeaker hang
point.
• Only use the pendant suspension cable with Bose Professional pendant
loudspeakers.
DesignMax DM10P-SUB • Installation Guide
BoseProfessional.com