Publicidad
Idiomas disponibles
Idiomas disponibles
Installation
Instructions
Questions? Visit our Website at: cafeappliances.com
In Canada, visit cafeappliances.ca
BEFORE YOU BEGIN
Read these instructions completely and carefully.
WARNING
Some built-in style models (some
PWE, GWE, PYD, PXD, CXE and CQE
heavy, especially with any doors open. If an anti-tip
floor bracket was included with your refrigerator, install
it to prevent the refrigerator from tipping forward, which
could result in death or serious injury. Read and follow
the entire installation instructions for installing the
anti-tip floor bracket packed with your refrigerator.
•
IMPORTANT
—
and ordinances. Save these instructions for local
inspector's use.
• Note to Installer – Be sure to leave these
instructions with the Consumer.
• Note to Consumer –
future reference.
• Skill level – Installation of this appliance requires
basic mechanical skills.
• Completion time – Refrigerator Installation can
vary Water Line Installation
30 minutes
• Proper installation is the responsibility of the
installer.
• Product failure due to improper installation is not
covered under the Warranty.
TOOLS YOU MAY NEED
Adjustable Wrench
1/4 Outer Diameter
Compression Nut
and Ferrule (sleeve)
49-1000329 Rev. 4
Tip Over Hazard.
PYE, GYE, GYS,
models) are top
Observe all governing codes
1/8
Ratchet/Driver
Pencil
1/8 Drill Bit and
Electric or Hand Drill
Pliers
Flat-Head Screwdriver
Level
Refrigerator
PREPARATION
MOVING THE REFRIGERATOR INDOORS
If the refrigerator will not fit through a doorway,
removed.
• To remove the refrigerator doors, see the Installing
the Refrigerator section.
WATER SUPPLY TO THE ICEMAKER AND
DISPENSER
If the refrigerator has an icemaker, it will have to be
connected to a cold water line. A GE Appliances
water supply kit (containing tubing, shutoff valve,
fittings and instructions) is available at extra
cost from your dealer, by visiting our website at
cafeappliances.com/parts (in Canada at
cafeappliances.ca/parts).
1/4 &
Phillips-Head Screwdriver
Allen Wrenches
1/4 Nut Driver
Torx T20, T25
Tape Measure
23
Publicidad
