Fimar MCD/260E Uso Y Mantenimiento página 53

▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬ BELL PACKAGING MACHINE MCD
L) Printer: it prints one or more receipts showing the date of expiry of the product and, by
means of the special keyboard, it shows the ingredients contained in the bags on the
product (for model MCD/S - MCD/CS only).
To replace the paper roll for receipts press button(L1) and pull both side flaps of the
housing outwards.
M) Selector: to select sealing bar that shall be used for packaging (only one sealing bar or
both sealing bars can be selected) (for model MCD/CS only).
N) Selector: to activate or deactivate the power supply (for model MCD/CS only).
P) Indicator light: when on, the appliance is electrically powered (for model MCD/CS only).
CONTROL DESCRIPTIONS (MCD/E)
The appliance is equipped with the listed control devices, required to run its main functions.
A) Main switch: used to turn electrical power on and off.
B) Display: Used to indicate the vacuum cycle time in seconds.
C) Button (+): used to increase the parameter value.
D) Button (-): used to decrease the parameter value.
E) Display: Serve per indicare il tempo (in secondi) del ciclo di saldatura.
F) Button (+): used to increase the parameter value.
G) Button (-): used to decrease the parameter value.
MCD / E
B C
V
A
D
- 21 -
E F
S
G
EN
English language