Descargar Imprimir esta página

Bosch GIC 12V-4-23 C Professional Manual Original página 29

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 49
Fitting the camera cable (see figure C)
For operation of the inspection camera, the camera cable (1) must be fitted on the hand-
held device (13).
Push the connector of the camera cable (1) onto the camera connection (23) in the cor-
rect position until it clicks into place.
Removing the camera cable (see figure D)
To remove the camera cable (1), press the locking mechanism (24) and pull the con-
nector out of the handheld device (13).
Fitting the mirror, magnet or hook (see figure E)
The mirror (27), the hook (26) or the magnet (25) can be fitted on the camera head (2)
as accessories.
Push one of the three accessories, as shown in the figure, all the way onto the camera
head (2).
Note: The magnet (25) and the hook (26) are only suitable for moving and removing
loose, small and light objects. The inspection camera or the accessory can be damaged
with too strong a pull.
Operation
Protect the handheld device and the rechargeable battery or battery adapter
u
from direct sunlight. Protect the rechargeable battery or battery adapter against
moisture. The camera cable (1) and camera head (2) are watertight if assembled cor-
rectly; the handheld device (13) is splash-proof. However, the rechargeable
battery (14) and the battery adapter are not protected against water. If they come
into contact with water, there is a risk of electric shock or damage.
Do not use the inspection camera if the lens on the camera head (2) has fogged
u
up. Switch the inspection camera on only if the moisture has evaporated. The in-
spection camera may otherwise become damaged.
The switched-on light (3) can become hot during operation. To avoid burns, do not
u
touch the light.
Do not subject the inspection camera to extreme temperatures or variations in
u
temperature. For example, do not leave it in a car for extended periods of time. In
case of large variations in temperature, allow the inspection camera to adjust to the
ambient temperature before putting it into operation.
Bosch Power Tools
English | 29
1 609 92A 8H6 | (07.03.2023)

Publicidad

loading