Publicidad
Idiomas disponibles
Idiomas disponibles
How to assemble
B
D
C
Please take note of the following assembly instructions to avoid all risk of accidents linked to the
folding And unfolding operations of your scooter (for example: getting your finger stuck).
Scooter assembly
A-Take out the plastic plug
With the tools in the accessory bag, remove the plastic stopper(12) so that the handles(1) can
be inserted into Handle locking mechanism(13).
B-Unfolding the steering column
Open the rapid tightening lever(11),then push the locking lever(5) forward to unlock the folding
Mechanism(10). Then lift up the steering column(9) until it reaches the vertical locking position
(you should Hear a "click" of engagement), then firmly tighten the rapid tightening lever(11).
C-Positioning the handles
Take the two handles(1) out of their plastic cover, insert them into the right and left parts of the
stem(7). For each of the two handles, you should hear a "click", indicating that the handles are
engaged(1). Check that the two spring buttons(6) are effectively out and visible.
D-Adjusting the handlebar height
Open the steering column rapid tightening lever(8), adjust the height of the handlebars until you
hear a "click", indicating engagement in one of the two indexed positions, then firmly tighten ten
steering column
EN-4
Publicidad
