Descargar Imprimir esta página

Gardena ZoneProtect 15021 Instrucciones De Empleo página 13

Ocultar thumbs Ver también para ZoneProtect 15021:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 52
LED indicators [ Fig. O2 ]:
With a battery status of 10 – 100 %, the status
is displayed by briefly pushing the button
5 seconds.
illuminates green
Activated and battery capacity
> 30 %
blinks green
Activated and battery capacity
< 30 %
flashes green
Activated and battery capacity
< 10 %
illuminates orange Battery is fully charged
blinks orange
Battery is charging
illuminates blue
Zone cable is not connected or
cut and battery capacity > 30 %
blinks blue
Zone cable is not connected or
cut and battery capacity < 30 %
flashes blue
Zone cable is not connected or
cut and battery capacity < 10 %
illuminates purple
Mower is in ECO Mode, boundary
cable is not detected or invalid
zone range and battery capacity
> 30 %
blinks purple
Mower is in ECO Mode, boundary
cable is not detected or invalid
zone range and battery capacity
< 30 %
flashes purple
Mower is in ECO Mode, boundary
cable is not detected or invalid
zone range and battery capacity
< 10 %
illuminates red
Error and battery capacity > 30 %
(see 6. TROUBLESHOOTING)
blinks red
Error and battery capacity < 30 %
(see 6. TROUBLESHOOTING)
flashes red
Error and battery capacity < 10 %
(see 6. TROUBLESHOOTING)
15021-20.960.01.indd 13
15021-20.960.01.indd 13
flashes white
5 times every
10 sec
(8)
for
blinks white
In order to achieve the maximum runtime of
the ZoneProtect, the mower must be operated
in Eco mode (see Operator's manual of the
robotic lawnmower).
To switch on the ZoneProtect
[ Fig. O2 ]:
Push the button
v
The ZoneProtect is switched on and
(L)
the LED
(depending on the battery capacity).
To switch off the ZoneProtect
[ Fig. O2 ]:
Push the button
v
The ZoneProtect is switched off and
(L)
the LED
4. MAINTENANCE
Clean the ZoneProtect with a damp cloth.
v
5. STORAGE
To put into storage:
The product must be stored away from
children.
1. Charge the battery.
2. Clean the ZoneProtect
(see 4. MAINTENANCE).
(8)
Push the button
so that the
status is displayed
ZoneProtect switches off
(8)
for 2 seconds.
illuminiates / blinks green
(8)
for 2 seconds.
blinks white.
13
04.02.22 10:43
04.02.22 10:43

Publicidad

loading