cecotec CONGA ANIMAL X Manual De Instrucciones página 51

Switch-off
Hold down the Start/Pause button on the robot vacuum cleaner to turn it off.
Warning
If you are not going to use the robot vacuum cleaner for an extended period of time, it is
advisable to leave it switched off until new use.
Cleaning modes
This robot vacuum cleaner includes different modes and functions that can be activated from
the remote control.
Auto Mode
- Press the Start/Pause button on the robot vacuum cleaner or the Auto Mode button on the
remote control: the robot vacuum cleaner will start cleaning automatically.
- The robot vacuum cleaner will clean the whole surface, edges, around objects such as
tables, chairs etc., until the battery is low, then it will return to the charging base.
Random mode
- The robot vacuum cleaner will clean randomly until the battery percentage is low and it
will return to the charge base.
- To activate this mode, press the random cleaning button on remote control.
Spiral mode
- When you select this mode, the robot vacuum cleaner will intensively clean a specific spot
at maximum power. It will start cleaning at a specific spot and will move outwards in a
spiral motion (1 metre). Then, it will return to the starting spot in an inwards spiral motion
again.
- Before using this mode, place it in the spot you wish to clean.
- When it finishes and returns to the starting point, the robot vacuum cleaner will stop at the
same point where it started cleaning.
- Press the Spiral cleaning button on the remote control to activate this mode.
Edge Mode
- When you select this mode, the robot vacuum cleaner will clean along the wall and around
furniture (table legs, chair legs, etc.) until it goes back to the charging base.
- Press the edge cleaning button on the remote control.
Scrubbing mode. Fig. 7
- Remove the water tank.
- Lift the tank silicone lid and fill it with water.
- Refit the water tank.
ENGLISH
51
CONGA ANIMAL X