Publicidad
Idiomas disponibles
Idiomas disponibles
STEP 2B Attach Wall Plate
CAUTION:
Avoid potential personal injury or property damage!
●
Mount wall plate
directly onto concrete surface (no wall covering)
08
●
Minimum solid concrete thickness: 8 in. (203 mm)
●
Minimum concrete block size: 8 x 8 x 16 in. (203 x 203 x 406 mm)
●
For concrete applications, arm assembly
Keep this in mind when selecting wall plate location
●
Install lag bolts
in slots AS SHOWN. Three (3) lag bolts
09
1
07
3x
1x
CAUTION:
Avoid potential personal injury or property damage!
Install three (3) lag bolts
at the top and one (1) lag bolt
09
3
10
CAUTION:
Be sure the anchors
concrete surface.
(STEP 3) must remain centered in wall plate
11
on top. One (1) lag lag bolt
09
at the bottom.
09
10
are seated flush with the
Solid Concrete or Concrete Block Installation
.
08
on bottom.
09
2
3 ¾ in. (9.5 cm)
3/8 in.
(10 mm)
CAUTION:
Never drill into the mortar between blocks.
4
09
08
002862.eps
CAUTION:
Avoid potential personal injury or property damage!
Improper use could reduce the holding power of the lag bolt
Tighten the lag bolts
wall plate
.
08
DO NOT over-tighten the lag bolts
only until they are pulled FIRMLY against the
09
.
09
07
09
.
7
Publicidad
