Página 1
BEFORE MOUNTING YOUR TV Record your TV information and save for future reference. Or, take a photo of your TV product sticker and save for future reference. Brand: Model No.: Serial No. (S/N): Version/SCC/Other: SLT4 INSTRUCTION MANUAL Para Español ver página 24...
Página 2
Get it right the first time. Our live US-based install shows how easy this is? HeightFinder™ shows you experts are standing by to help. where to drill. Watch it now at: Use it now: Call us at: 1-888-333-1376 SANUS.com/2980 SANUS.com/1173...
Página 3
(including accessories) Yes — This mount is NOT compatible. 110 lbs. 150 lbs. Concrete or Concrete Stud Walls weigh more Visit MountFinder.Sanus.com or call 1-888-333-1376 to find a Block Walls (49.8 kg) (68.0 kg) than compatible mount. What is your...
Página 4
Before you begin Remove the stand Install any accessories Protect the face from your TV — of your TV if attached. you may have purchased — if they require when laying it down for installation. the TV to be removed from the wall for assembly.
Página 5
STEP 1 Attach TV Bracket to TV WARNING: This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer; contact Customer Service. Never use damaged parts! NOTE: Not all hardware included will be used.
Página 6
1.1 Select TV Screws 1.2 Determine Spacer Need TV Bracket TV Bracket Flat Back Cables Round Back Inset Holes TV Bracket TV Bracket TV Bracket Too Short Correct Too Long For rounded-back TVs, cable interference or inset For flat-back TVs, no CAUTION: spacers holes, spacers...
Página 7
1.3 Attach TV Bracket Assembly to TV POSITION SECURELY TIGHTEN Flat-back TVs Rounded-back TVs / Extra Space tilt tension knob TV brackets should be oriented to TIP: the outside edges. Center the TV brackets over your TV's mounting hole pattern - Install using the spacer, screw and washer combination you selected for your TV.
Página 8
STEP 2 Attach Wall Plate to Wall WARNING: This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer; contact Customer Service. Never use damaged parts! NOTE: Not all hardware included will be used.
Página 9
STEP 2A Wood Stud Installation CAUTION: Avoid potential personal Min. 1 ½ in. (3.8 cm) injury or property damage! ● Drywall covering the wall Min. 3 ½ in. (8.9 cm) Min. 16 in. (40.6 cm) must not exceed 5/8 in. (1.5 cm) ●...
Página 10
CAUTION: Be sure you drill into the CENTER of the stud. TIP: HeightFinder at sanus.com [www.sanus.com/1173]. Place the wall plate template at your desired height and position the slotted holes over Drill the four pilot holes using a 7/32 in. (5.5 mm) diameter drill bit.
Página 11
REMOVE TEMPLATE SECURELY TIGHTEN CAUTION: Avoid potential personal injury or property damage! All four lag bolts and washers MUST BE firmly tightened to prevent unwanted movement of the wall plate . Ensure the wall plate is securely fastened to the wall before continuing on to the next step. Install the four lag bolts and washers and firmly tighten until they...
Página 12
For concrete installations ONLY CAUTION: Do not use in drywall or wood To calculate your precise wall plate location, check out our TIP: TIP: HeightFinder at sanus.com [www.sanus.com/1173]. Concrete Anchor Position the wall plate template on the wall at your desired height.
Página 13
DRILL REMOVE TEMPLATE 3 in. (7.6 cm) 3/8 in. (10 mm) CAUTION: CAUTION: Never drill into the mortar between blocks. Never drill into the mortar between blocks. Drill four pilot holes using a 3/8 in. (10 mm) diameter drill bit. Remove the wall plate template and discard.
Página 14
STEP 2B (continued) INSERT ANCHORS SECURELY TIGHTEN 08 09 CAUTION: Avoid potential personal injury or property damage! All four lag bolts and washers MUST BE firmly tightened to prevent unwanted movement of the wall plate . Ensure the wall plate is securely Be sure the anchors are seated flush with the CAUTION:...
Página 15
STEP 2C Steel Stud Installation Kit (NOT INCLUDED) CAUTION: Avoid potential personal Contact Customer Service at +31 (0) 495 580 852 to have the additional hardware shipped directly to you. injury or property damage! Min. 16 in. (40.6 cm) ● Studs must be at least 2x4 / 25 ga. ●...
Página 16
CAUTION: Be sure you drill into the CENTER of the stud. TIP: HeightFinder at sanus.com [www.san.us/1173]. Drill the four pilot holes using a 1/2 in. (13 mm) diameter drill bit. Place the wall plate template at your desired height and position the slotted holes over IMPORTANT: Pilot holes must be drilled to a depth of 1 in.
Página 17
INSTALL ANCHORS SECURELY TIGHTEN CAUTION: Avoid potential personal injury or property damage! All four screws MUST BE firmly tightened to prevent unwanted movement CAUTION: Be sure cap of the wall plate . Ensure the wall plate is securely fastened to the wall seated against the drywall surface.
Página 18
STEP 3 Attach TV to Wall Plate HANG ATTACH HEAVY! You may need assistance with this step. CAUTION: CAUTION: Avoid potential personal injury or property damage! Avoid potential personal injury or property damage! For CONCRETE APPLICATIONS: Always make sure TV brackets are in the locked position so the TV brackets MUST remain centered in wall plate...
Página 19
Manage Cables INSTALL CABLES TIP: Extend the TV outward AND tilt the TV up or down to gain better access to the back of the TV. TIP: Move your TV to various positions, as needed to attach your cables, then adjust the TV as desired.
Página 20
Adjustments LEVEL HEIGHT To level your TV, turn the Adjust the height level adjustment screw by turning the level on the top of either adjustment screw RAISE LOWER TV bracket on the top of both TV RAISE RAISE to raise or lower that brackets LOWER LOWER...
Página 21
TILT EXTEND / RETRACT Your TV should adjust easily when moved, then stay in place. Adjust the tilt tension knob if your TV naturally tilts up or down. NOTE: If you do not intend to adjust the tilt for different viewing locations, you can tighten the tilt tension knobs CAUTION: Avoid potential...
Página 22
TV LATERAL SHIFT REMOVING THE TV HEAVY ! You may need assistance with this step. HEAVY ! You may need assistance with this step. Disconnect all cables from the TV. CAUTION: Avoid potential personal To unlock the TV from the wall plate: Pull down and hold both release tabs while gently pulling the bottom of the injury or property damage!
Página 24
68,0 kg 49,8 kg Sí: Este soporte NO es compatible. hormigón macizo o con montantes pesa más de Visite MountFinder.Sanus.com o llame al 1-888-333-1376 para buscar un bloques de hormigón de acero (150 lbs) (110 lbs) soporte compatible. ¿De qué está...
Página 25
Español ESTAMOS A SU DISPOSICIÓN PARA AYUDARLE ¿Desea ver un vídeo que muestra lo fácil que será este proyecto de bricolaje? Puede verlo en: SANUS.com/2980 Acierte a la primera. HeightFinder™ indica el lugar donde debe taladrar. SANUS.com/1173 Descúbralo en: Nuestros expertos instaladores en EE. UU. están a su disposición para ayudarle.
Página 26
Español PASO 1 Cómo acoplar el soporte al televisor PÁGINA 5 ADVERTENCIA: Este producto contiene piezas pequeñas que, en caso de ser tragadas, podrían causar asfixia. Antes de comenzar a montar la unidad, verifique que dispone de todas las piezas y que se encuentran en buen estado.
Página 27
COLOCAR LA PLANTILLA CONSEJO: Para calcular la ubicación exacta de la placa mural descubra nuestro HeightFinder en sanus.com [www.sanus.com/1173]. Coloque la plantilla de la placa mural a la altura deseada y coloque las ranuras sobre las líneas centrales del montante. Nivele la placa mural y marque la posición de los orificios.
Página 28
COLOCAR LA PLANTILLA CONSEJO: Para calcular la ubicación exacta de la placa mural descubra nuestro HeightFinder en sanus.com [www.sanus.com/1173]. Coloque la plantilla de la placa mural sobre la pared a la altura deseada. Nivele la placa mural y marque la posición de los orificios.
Página 29
COLOCAR LA PLANTILLA CONSEJO: Para calcular la ubicación exacta de la placa mural descubra nuestro HeightFinder en sanus.com [www.sanus.com/1173]. Coloque la plantilla de la placa mural a la altura deseada y coloque las ranuras sobre las líneas centrales del montante. Nivele la placa mural y marque la posición de los orificios.
Página 30
Español PASO 3 Cómo fijar el televisor a la placa mural PÁGINA 18 COLGAR EL TELEVISOR EN LA PLACA MURAL PRECAUCIÓN: Para APLICACIONES DE HORMIGÓN: DEBEN permanecer centrados en la placa mural ¡Evite posibles lesiones personales o daños materiales! Los soportes del televisor NOTA: Para APLICACIONES EN MONTANTES DE MADERA, los soportes del televisor pueden deslizarse a cualquier parte de la placa mural para conseguir colocar su televisor en una posición óptima.
Página 31
SANUS will not be liable for any damages whatsoever arising out of the use or inability to use its products, even if SANUS has been advised of the possibility of such damages. To the maximum extent permitted by applicable law, SANUS disclaims any responsibility for incidental or consequential damages (such as the cost of repairing or replacing other property which damaged when the device does not work properly).