GYS GYSPACK AIR Manual Del Usuario página 16

Translation of the original instructions
• Unplug the black clamp, then the red one from the vehicle.
• Recharge your GYSPACK AIR after use. (see 'Charging internal battery')
IN THE EVENT OF A PROBLEM
Some more modern vehicles, equipped with highly sensitive ECUs, will not start when using this product.
The voltage drop caused by the starting current can potentially trigger ECU safety devices, and prevent the
vehicle from starting.
CHARGING INTERNAL BATTERY USING INTEGRATED CHARGER
The GYSPACK AIR is fitted with an automatic charger which maintains the internal battery fully charged wit-
hout the need for monitoring. When the battery is fully charged, the charger will automatically go into floating
mode and stop the charge. It will automatically restart when needed.
To recharge the GYSPACK AIR :
• Place the GYSPACK AIR in a vertical position during the charge.
• Plug in the power supply to an outlet 230 V and the other end on the front of GYSPACK AIR (n°2 fig p. 41).
• The green indicator indicates the charge that the GYSPACK AIR is over.
Nb : If the device stays more than 24 hours in charging mode (red LED, orange indicator on), then manually
stop the charge. The internal battery of your GYSPACK AIR is damaged.
USING THE GYSPACK AIR AS 12V DC POWER SUPPLY
The cigarette lighter plug is protected by an integrated 20 A circuit breaker. In the event of an
overheating due to an overcharge, the circuit breaker will stop the power supply.
Position the switch «OFF».
Open the lead of the cigarette lighter plug Remove cigarette lighter and plug lead into the hole (n°1 fig p.
65).
Plug your electrical device into the plug of GYSPACK AIR, using the proper cable (not included).
Device
Fluorescent cellular light
Radio, Fan, Echoprobe
Videocamera, light spot
Power tool, drying pump
Air Compressor, Car vaccum cleaner
SPOT-LIGHT
The GYSPACK AIR has an in-built spotlight comprised of 7 high intensity LEDs controlled by the «light»
button (n°11 fig p. 65).
Repair should always be carried out by qualified personnel.
AIR COMPRESSOR
GYSPACK AIR integrates an 4 bars compressor, allowing to inflate :
• Tyres with their original valve. (press the lever to lock the hose on the valve).
• Balloons with thin end (included).
• Any other plastic objects (beach balloons, toys, air beds, etc.) with 2 special ends "connectors"
16
Estimated autonomy of GYSPACK AIR as a 12 V DC power supply
Estimated consumption (in watts)
GYSPACK AIR
4
9
15
24
80
Estimated automomy (in hours)
50
22
13
8
2
EN