Residual Heat Indication; Booster Function; Power Management - Novy 1773/2 Instrucciones De Uso Y De Instalacion

Residual heat indication

After the switching off of a heating zone or the complete stop of the hob, the heating zones
are still hot and indicates [ H ] on the display.
The symbol [ H ] disappears when the heating zones may be touched safely.
As long as the residual heat indicators are on, don't touch the heating zones and don't put any
heat sensitive object on them. There are risks of burn and fire.

Booster function

The Booster function [ P ] and the Double Booster [
heating zone.
If this function is activated the heating zones work for 10 minutes with an ultra high Booster.
Booster is useful for example to heat up rapidly big quantities of water, like rice, pasta or
noodles.
• Start up / Stop the booster function:
Action
Zone selection
Start up the Booster
Stop the Booster
• Start up / Stop the double booster function:
Action
Selection of the zone
Start up Booster
Start up Double Booster
Stop the Double Booster
Stop Booster

• Power management:

The total cooking hob is equipped with an overall maximum of Booster power. When the Booster
function is activated, the electronic system automatically regulates all "Boosters" selected to
equalise the available power to each element selected for booster. The display is blinking on [ 9 ]
for a few seconds and then shows the maximum of Booster allowed :
Heating zone selected
[ P ] is displayed
Control panel
Press key [ 0 ] from the zone
Press key [ B² ]
Slide on the "SLIDER"
Control panel
Press key [ 0 ]
Press key [ B² ]
Re-press key [ B² ]
Press key [ B² ]
Slide on the "SLIDER"
The other heating zone:
[ 9 ] goes to [ 6 ] or [ 8 ] depending on the type of zone
10
] adds a booster power to the selected
Display
[ 0 ]
[ P ]
[ 9 ] to [ 0 ]
Display
[ 0 ]
[ P ]
[
[ P ]
[ 9 ] to [ 0 ]
(example: Booster level 9)
and P ]