Publicidad
Idiomas disponibles
Idiomas disponibles
Replacingtheinnerblades
1. Press the foil frame release buttons and lift
the outer foil section upwards.
. Remove the inner blades one at a time.
•
Do not touch the edges (metal parts) of
the inner blades to prevent injury to your
hand.
3. Insert the inner blades one at a time until
they click.
Replacementparts
Replacement parts are available at your dealer or Service Center.
Replacement parts for
System outer foil and
ES‑LV81
inner blades
System outer foil
Inner blades
Detergent cartridge
1
Cleaningtheself‑cleaningrecharger
1
Beard trimmings may become attached to the cleaning tray of the
self‑cleaning recharger. Follow the steps below to remove them.
We recommend doing this each time you change the detergent
cartridge.
1. Be sure to remove the water tank and the
appliance plug from the self‑cleaning
2 3
recharger.
•
Be careful not to spill the cleaning liquid.
. Gently wipe off any beard trimmings
attached to the inside of the cleaning tray
with a cloth or tissue paper dampened with
water.
•
Clean the corners and uneven parts of the
cleaning tray with a cotton swab
dampened with water.
WES9030
WES9171
WES9170
WES035
Do not pull hard on the rubber blade protector (a) at the bottom
of the cleaning tray. The rubber may come off if you pull hard on
it. It is only necessary to pull it up slightly.
Warning
DonotwashorapplywatertotheACadaptororself‑
cleaningrecharger.Failuretoobservethismaycause
electricshockorresultinshortcircuits.
Publicidad
