Publicidad
Idiomas disponibles
Idiomas disponibles
All manuals and user guides at all-guides.com
２．Trial
A.
The user must "Start the Pump before the Machine, and Turn off the
Machine before the Pump", or the machine will be damaged;
B.
The user should start the pump, check for any leakage of water; and then
set suitable temperature in the thermostat, and then switch on power
supply;
C.
In order to protect the swimming pool heater, the machine is equipped
with a time lag starting function, when starting the machine, the blower
will run 1 minutes earlier than the compressor;
D. After the swimming pool heater starts up, check for any abnormal noise
from the machine.
Precautions
１. Attention
A.
Set proper temperature in order to get comfortable water temperature
to avoid overheating or overcooling;
B.
Please don't stack substances that can block air flow near inlet or outlet
area, or the efficiency of the heater will be reduced or even stopped;
C.
Please don't put hands into outlet of the swimming pool heater, and don't
remove the screen of the fan at any time;
D. If there are abnormal conditions such as noise, smell, smoke and electrical
leakage, please switch off the machine immediately and contact the local
15
Publicidad
