RIDGID WD16650 Manual Del Usuario página 12

SP6728 16 Gallon
Operation (continued)
!
WARNING: To reduce the risk of
injury to bystanders, keep them
clear of blowing debris.
!
CAUTION: Wear a dust mask if
blowing creates dust which might
be inhaled.
!
CAUTION: To reduce the risk of
hearing damage, wear ear protectors
when using the vac/blower for
extended time or in a noisy area.
1. Familiarize yourself with the detachable
blower portion of your Wet/Dry Vac.
2. Remove the detachable blower of your
Vac by pressing down on the power
head latch under the handle of the
detachable blower. (This power head
latch holds the detachable blower to
the lid assembly.)
Male-Male
Adapter
3. Lift the detachable blower up by raising
the handle upward and pulling the unit
away from its nested position on the
lid.
10/28/09 8:56 AM
Goggles
Dust Mask
Blowing Port
Extension
Wand
Blower Nozzle
Page 12
Assemble the Detachable
Blower for "Blowing"
This may be assembled three ways:
1. Insert the small end of one of the
extension wands into the blowing port
of the detachable blower. Insert the
male-male adapter into the extension
wand and install the blower nozzle
onto the male-male adapter.
2. Insert the male-male adapter into the
blowing port of the detachable blower.
Connect the large end of the
extension wand to the male-male
adapter. Connect the blower nozzle to
the extension wand. If the additional
reach is not needed, simply omit the
wand, and connect the blower nozzle
to the male-male adapter.
3. The Wet/Dry Vac may also be used for
blowing using the seven foot hose
supplied with the Wet/Dry Vac. Install
the male-male adapter in the blowing
port of the Wet/Dry Vac. The male-
male adapter will insert into the inside
of the push button end of the Vac
hose. Assemble the hose to the male-
male adapter and connect the blower
nozzle to the opposite end of the
hose. The unit is ready for blowing
applications.
4. Turn the blower "ON" by toggling the
switch in the handle of the blower to
the "ON" position.
12
- OR -
Blowing Port
Blower
Blowing
Nozzle
Nozzle
Male-Male
Adapter
Blower
Blowing
Nozzle
Nozzle
Male-Male
Adapter
Hose