Publicidad
Idiomas disponibles
Idiomas disponibles
6
Make sure the filter cartridge remains in place when the spa is
filled with water.
NOTE: It is recommended to fill the spa with lukewarm water for quick heating and energy saving. Using tap water for spa filling to minimize the influence of
unwanted content, such as minerals.
NOTE: Ensure the manometer points to the Green section when the spa is filled with water.
WARNING:
Do not drag the spa after filling it with water.
Do not operate the spa until the water reaches the Minimum line.
The water temperature should not be higher than 40°C / 104°F.
NOTE: Always keep the spa cover on to minimize heat loss when heating the water.
Make sure the cover, and mostly its side facing water, will not come into contact with the ground or any other dirt when not in use.
Covers shall be cleaned inside and out periodically using a suitable solution that includes adequate disinfection (e.g. 10mL/L of free Chlorine).
CONTROLLER OPERATION
Buckle Lock Operation
LED Display
Heater Button
Bubble Button
Up Button
7
°C
°F
UVC
HEATER
FILTER
BUBBLE
TIMER
UP
DOWN
10
Lock
UVC Button
Filter Button
Timer Button
Down Button
Unlock
Publicidad
