Lcd Screen; Receiver; Global Description - Chauvin Arnoux LOCAT-N C.A 6681 Manual De Instrucciones

English
2.1.2

LCD SCREEN

Fig.3

2.2 RECEIVER

2.2.1

GLOBAL DESCRIPTION

Fig.4
44
(1) Symbol indicating that batteries are
dead and must be replaced.
(2) Transmitted power level (Level I, II, or
III).
(3) Transmission code (F is default).
(4) AC voltage.
(5) DC voltage.
(6) Measured voltage (the device can be
used as an ordinary voltmeter; voltage
range: 12 to 300V DC or AC).
(7) Transmission status.
(8) Code transmitted.
(9) Strength of transmitted signal.
(10) Voltage present symbol.
(11) Silent mode symbol.
(1) Lighting torch.
(2) Head of the sensor.
(3) LCD screen.
(4) On/Off key.
(5) Back-lighting and silent mode On/Off key.
Press briefly to activate/de-activate the back-
lighting and press for 1 second to activate/de-
activate the silent mode (in silent mode, key
presses are silent and the buzzer is off).
(6) Torch On/Off key.
(7) UAC: Selection of the cable detection mode
or of the mains voltage detection mode.
(8) Selection of manual or automatic mode for
cable detection.
(9) Adjustment key to decrease receive
sensitivity in manual mode.
(10) Adjustment key to increase receive
sensitivity in manual mode.
(11) Buzzer.
C.A 6681 Cable Locater