MAINLINE MLS10005 Instrucciones De Montaje página 4

NOTE:
Do not use adhesives or adhesive sealants.
 Apply a continuous bead of quality sealant to the lavatory rim where it will contact
the countertop.
NOTE:
The screws provided should be used on countertops with a minimum 1" (2.5cm) thickness.
For thinner countertops, use appropriate anchors and fasteners.
 For wood, wood composite and marble countertops, install the lavatory to the
countertop with the clamps and screws provide.
 For other countertop materials refer to the countertop manufacturer's instructions for
recommended fasteners.
 Position the lavatory squarely under the cutout before tightening the clamps. Draw
the lavatory rim up to the countertop until it is snug. Do not overtighten.
 Immediately wipe away any excess sealant.
 Make the final drain and faucet connections to complete the lavatory installation.
Be sure to follow all instructions packed with the drain and faucet.