Descargar Imprimir esta página

MCS Master BC 220 Manual De Instrucciones Para El Uso Y Mantenimiento página 10

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 22
en
►►1. INFORMATION ON
SAFETY
IMPORTANT: READ AND UNDER-
STAND THIS OPERATIONAL MANUAL
BEFORE ASSEMBLING, COMMISSION-
ING OR PERFORMING MAINTENANCE
ON THIS APPLIANCE. INCORRECT USE
OF THE APPLIANCE CAN CAUSE SERI-
OUS INJURY. KEEP THIS MANUAL FOR
FURTHER REFERENCE.
IMPORTANT: This appliance is not
suitable for use by persons (including
children) with reduced physical, senso-
ry and mental capacities or with lack of
experience or knowledge unless super-
vised by a person responsible for their
safety. Children must be supervised to
make sure they do not play with the app-
liance.
►1.1. Fill the appliance tank only with
clean water.
►1.2. Switch off and disconnect the appli-
ance from the mains before filling it.
►1.3. Do not move the appliance, once
the tank has been filled.
►1.4. Comply with all local regulations
and current standard during appliance
use.
►1.5. Keep the appliance dry, in order to
avoid electric shocks. Hands must al-
ways be dry.
►1.6. Use only in ventilated and dry ar-
eas.
►1.7. For indoor use only.
►1.8. Only power the appliance the with
voltage and frequency as specified on
the nameplate.
►1.9. Only use suitably earthed 3-wire ex-
tension leads.
►1.10. Do not cover the appliance with
paper, cardboard, plastic, metal sheets
or any other inflammable material dur-
ing use, in order to prevent any risk.
►1.11. The appliance must be used on a
stable and levelled surface, in order to
prevent any risk.
►1.12. Disconnect the appliance from the
mains socket when not in use.
►1.13. Do not block the air vent (rear side)
or the air outlet (front side) of the appli-
ance.
►1.14. The minimum safety distance
recommended between the appliance
and walls or other items is 0,5 m.
►1.15. When the appliance is connected
to the mains or running, it must never
be moved, handled, topped-up or sub-
ject to any maintenance operation.
►1.16. The appliance (power cable in-
cluded) must be kept at a suitable safe-
ty distance from heat sources.
►1.17. In any case, the appliance must
be opened and/or repaired by author-
ised after-sales centre.
►1.18. If the power supply cable is dam-
aged, it must be replaced by a techni-
cal support centre to prevent any risk.
►1.19. After a period of inactivity, wash
the tank with clean water.
►1.20. In the event of incorrect cooler
operation, immediately disconnect the
electrical power supply and contact
the support centre.
►1.21. Protect the power cable from po-
tential damage caused by the move-
ment of vehicles or pedestrians. Im-
proper connection to electrical voltage
or improper installation may result in
electric shocks.
►1.22. Conditions of use:
A) Temperature of the air: 18°C - 45°C;
Temperature of the water: <45°C.
B) The air must be free of dust and pol-
lutants, otherwise cleaning must be in-
tensified.
►1.23. The water used to fill the cooler
tank must come from an aqueduct. If
it is not possible to draw from an aq-
ueduct, the water introduced must be
subjected to a sanitation treatment, ac-
cording to European Directive 98/82/
EC.
-We recommend using water with a
hardness of less than 15°f.
-The cooler tank must be emptied and
sanitised periodically depending on
the use.
-The cooling pad surfaces must be pe-
riodically inspected and sanitised de-
pending on the use.

Publicidad

loading

Este manual también es adecuado para:

Bc 120