ULTIMATE SPEED UMAP 12000 B2 Instrucciones De Funcionamiento Y De Seguridad página 13

Switch the device off and remove the
„
plug from the socket in the following
cases:
when you are not using the device;
–
if you are leaving the device
–
unsupervised;
when you are carrying out cleaning
–
or maintenance work
if the connection cable is damaged
–
if foreign objects have got into the
–
device or you notice unusual noises
Only use the accessories supplied and
„
recommended by the manufacturer.
Do not dismantle or modify the portable
„
jump starter with power bank. This device
must only be repaired by a maintenance
technician.
Do not use the device in areas with a
„
risk of explosion, e.g. near flammable
liquids, gases or powders.
Do not expose the device to any source
„
of heat.
Do not store in places where the
„
temperature can exceed 70 °C.
Only charge in an ambient temperature
„
between 0 °C – 40 °C.
Only use the 3-way USB cable
„
supplied with the device.
CAUTION! How to avoid
accidents and injuries resulting
from electric shock:
GB/IE/NI/CY/MT
as
16
13