ULTIMATE SPEED UMAP 12000 B2 Instrucciones De Funcionamiento Y De Seguridad página 17

z Charge portable jump starter with
power bank
„
Connect the 3-way USB cable
(USB-C)
4
appropriate USB network adapter (working output voltage
U 5 V
out,max
PLEASE NOTE: USB network adapter not included in the
scope of delivery.
PLEASE NOTE: An undervoltage protection circuit is
installed in the portable jump starter with power bank
protect the device from damage. This prevents a deep discharge
of the portable jump starter with power bank
cally switches the device off once the rechargeable battery pack
is fully discharged. Shortly before the undervoltage protection
circuit is activated, the last blue indicator light
flash. As soon as the undervoltage protection circuit is activated,
the last blue indicator light
be delivered. Please charge the portable jump starter with power
bank again.
1
z Using the jumpstart feature
Step
1. Connect the
10
jump lead of
the portable
jump starter with
power bank...
... to the
jumpstart outlet
9
of the mobile
jump starter with
1
power bank
and an appropriate USB-A socket or an
).
8
LEDs
Red Error LED
is continuously lit
on the jump lead
10
.
Green Start LED
12
and the red
13
Error LED
flash alternately.
.
GB/IE/NI/CY/MT
with the charging port
16
flashes and power will no longer
Meaning / Error
The voltage
13
determined in
the portable
jump starter with
power bank
is not enough to
start the car.
The portable
jump starter with
power bank
is ready.
to
1
and automati-
1
will start to
8
Solution
Charge the
portable jump
starter with
power bank
1 1
.
Carry on with
step 2.
1
17