Hygienical Principles; Environment Principles; Liquidation Of The Machine After Termination Od Its Service Life - ENAR CRENA 22 Manual De Instrucciones

2.3 HYGIENICAL PRINCIPLES

Oil derivates (fuel, lubricants) are harmful agents. Anyone who gets into contact with such agents is obliged
to protect himself and follow general principles of health protection as well as to follow instructions valid for
each specific agent.
Pay special care to:
•
skin protection against direct contact with oil derivates;
•
wash hands properly after finishing the work and apply suitable hand cream.
Store the fuels, lubricants, cleansing and conservation agents, as well as other dangerous agents in original
containers, properly sealed. Never allow storing in unmarked bottles or containers or even in beverage
bottles. Store such agents in safe place, out of reach of children.
In case that the agent gets into touch with skin or eyes, or when it is eaten or inhaled, apply the first aid and
get immediately medical aid.

2.4 ENVIRONMENT PRINCIPLES

Fuel, lubricants and other operational fluids are harmful to environment. This category also includes part of
the machine that get into contact with operational fluids, such as filter and hydraulic hoses.
After use these belong to dangerous waste.
Pay high attention to avoid leakage of the fluids and their escape into soil or water (including the sewage).
Store the fluids in such manner, that the fluids gets caught in case of accidental leakage.
If these agents still escape, arrange their safe collection and liquidation (spread with an absorbent and commit
to a specialized company).
Used operational fluids are to be disposed off in accordance with the respective regulations.

2.5 LIQUIDATION OF THE MACHINE AFTER TERMINATION OD ITS SERVICE LIFE

After the machine exceeds its service life, the contractor is obliged to arrange its proper liquidation in
accordance with the respective lawful regulations and with regards to environmental protection.
Oil fills have to be removed from the engine and from the vibration mechanism, and the used filters have to
be dismantled.
In accordance with the law of waste disposal, the owner of the machine to be disposed off is obliged to:
•
commit the metal parts only to persons authorized to liquidate, collect and buy-out this type of
waste;
•
used engine oil and used hydraulic oil can be committed only to persons authorized to handle
waste oils;
•
the same is true for motors and all electrical components that may carry.
Company Enarco S.A. does not bear any responsibility for user's health or environmental damages caused
by failure to keep the above mentioned hygienical and environmental principles.
To help protect the environment, take the machine to a suitable recycling centre.
COMPONENT
Handlebar
Cage assembly
Engine plate
Compaction plate
Handlebar cover
Handle supports
Motor
REVERSIBLE VIBRATORY PLATE COMPACTOR
MATERIAL COMPONENT
Steel
Steel
Steel
Steel
Rubber Wheelbase
Aluminium
Aluminium
MATERIAL
Dampers Steel and Rubber
Belt Rubber
Frame Aluminium
Cam box Steel
Steel
Wheels Plastic and Rubber
Shafts Steel
CRENA 52*, 63*
en
7