Publicidad
Idiomas disponibles
Idiomas disponibles
6) BASIC FUNCTIONS AND CONFIGURATION
6.1) INITIAL POWER-UP
The device can be powered directly by the 2-wire BUS or by a stabilised 30 Vdc power supply (VI2F-ALI600MA).
When the device is switched on for the first time, or after a factory reset, the language selection page will appear on the LCD: after the language has been selected, the home page will be displayed.
Note: if no language is selected, English will be the automatic default language after 1 minute.
6.2) ANSWERING A CALL
When a call arrives from an outdoor station, the indoor monitor will start to ring and the screen shown below will be displayed:
It will be possible to:
- Answer an incoming call by pressing button
- Unlock the electric locks during the conversation:
Unlock 1 (power relay): press button
Unlock 2 (clean contact relay): press button
Unlock 3 (clean contact auxiliary relay): press button and hold for 3 seconds
Five seconds after releasing an electric lock, the device automatically returns to the home page.
- Close/reject a call by pressing button
- Change the call volume using buttons
- During the call, pressing button
- During a call, pressing button
6.3) HOMEPAGE
The home page of the device (shown opposite) displays some quick menus that can be accessed by clicking on them.
The "Log" button on the main page includes a small number that indicates how many calls are in the call log.
6.3.1) LOG
The Log menu is used to save the information about calls that have reached the device.
By pressing on each individual call, you can view the snapshot photo taken during the first 3 seconds of the call.
Pressing the "Clear All" button deletes the call log.
The call log can store a maximum number of 200 calls.
6.3.2) BACKGROUND
From the "Background" menu, you can select the background of the homepage of the indoor video intercom station.
Enter the menu, select the desired background from those displayed and press "Finish" to confirm the operation.
Pressing the "Cancel" button will end the operation and the device will automatically return to the homepage.
Pressing the "Reset" button will display the default image.
6.3.3) CALL
The "Call" menu is used to make calls to other monitors in the same or different flats or to the gatehouse station.
Intercommunication call: enter the number of the flat to be called (1-128) and press the icon
Call to gatehouse station: enter the number 200 (the number assigned to the gatehouse station cannot be changed) and press button
Intercom call: press the "internal call" button to initiate a call to all internal stations in the flat;
all indoor stations will ring.
6.3.4) VOICE MESSAGE
This feature allows you to record a short message on the indoor station that can be played back at a later stage.
A number will appear on the homepage of the device to show how many messages are in the menu.
Recording a message: press the record button on the left side of the screen to start recording and then record your message.
Press the button once more to end the recording. The maximum recording time is 30 seconds and the remaining time for recording the message is displayed at the bottom of the screen.
Listening to a message: press the "Play" button (green triangle) beside the message to play the message.
Delete message list: press "Delete all" to clear the log.
Note: a maximum of 30 messages can be recorded.
6.3.5) MONITOR
Pressing the "Monitor" button activates the interface to outdoor stations
Monitoring and unlocking electric locks: switch between the various outdoor stations (if more than one is installed on the system) to display their cameras. During monitoring, it is possible
to unlock the electric locks by pressing the dedicated unlock buttons.
Surveillance, capture photo/video: during the camera surveillance operation, it is possible to capture:
an image by pressing button
a video by pressing button
Call: during the camera surveillance operation, communication to the outdoor station can be activated by pressing button
Notes:
Captured photos and videos are saved in the call log.
When the associated AVE VIDEO V44 APP remotely monitors the outdoor station, the main "MASTER" monitor enters the Cloud intercom state and cannot be used.
The "SLAVE" monitors, in turn, enter the standby state and cannot monitor the outdoor station. Normal operation will be restored when communication towards the AVE VIDEO V44 APP
stops.
6.3.6) SETTINGS
The "Settings" menu provides access to all system configuration parameters. The meanings of the various items in the menu are given below:
DISPLAY SETTINGS
- Brightness: screen brightness;
- Screensaver delay: time after which a screen lock is activated;
- Screensaver duration: time after which the screen is switched off.
WARNING TONE
- Ringer volume: ringer volume when a call comes in;
- Button volume: volume of button sounds;
- Button tone: sound emitted when a button is pressed;
- Ringtone: sound heard when a call comes in.
and
takes a photo from the outdoor station camera
records a video; for this you need to install an SD card in the device.
5
Publicidad
